JY Digital Megohmmeter Analog Megohm Meter DC Megger Meter Insulation Resistance Tester
Introduction:
Main Parameters:
DC voltage range | 0~1000V | |
AC voltage range | 0~750V | |
DC Current | 0.1nF~6mA | |
Capacitance | 10nF~50uF | |
Output short circuit current | ≥6mA | |
Measurement of absorption ratio and polarization index | Yes | |
Power supply | 12V chargable battery | |
Backlight | Controllable gray and white screen backlight, suitable for use in dark places | |
Display | 4-digit large LCD display, gray and white screen backlight | |
LCD screen | 108mm×65mm | |
Dimension | 240mm(L)*188mm(W)*85mm(H) | |
Weight | 2750g (with battery) | |
USB function | With USB interface, software monitoring, storage data can be uploaded to the computer, save and print | |
Test cable | High voltage rod 3 meters (red), high voltage cable black 1.5 meters, green 1.5 meters. | |
Data storage | 500groups,when flashing "FULL" symbol, it indicates the storage is full | |
Data review function | "MR" symbol | |
Over-range display function | ">" symbol | |
Alarming | It will alarm when the resistance is low and voltage is high. The alarm value needs to be set. | |
Power consumption | Standby: 30mA Max (backlight off); Turn on the backlight: 42mA Max,m; Measurement: 200mA Max (backlight off). | |
Automatic turn off | No operation in 15min | |
Insulation resistance | ≥50MΩ (Between measurement line and enclosure) | |
Withstand voltage | AC3kV/50Hz 1min | |
Working environment | -10ºC~+50ºC<85%RH | |
Storage environment | -15ºC~+55ºC<90%RH | |
Safety regulations it comply with | IEC61010-1, IEC1010-2-31, IEC61557-1,5, IEC60529(IP54), etc. |