Type 2 EV AC Female Socket For Station Side/ Male Socket For EV Side/Socket With Shutter Obturator 16A 32A 250V, Single Phase or 415V,Three Phase Type 2 IEC62196-2 Connector Car Accessories
 | 16A 32A Type 2 EV AC female socket for station side - Rated current: 16A/32A
- Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option
- Operation Temp.:-30℃ ~ + 50℃
- IP protection class: IP 54 ( working condition)
- Product description: This IEC62196 Type 2 AC EV Female Socket is used at the type 2 AC charging station, as a electric outlet for model 3 charging cable to charge the electric cars.
|  Model selection and the standard wiring - 16A Single phase; 3 X 2.5mm² + 2 X 0.5mm²
- 16A Three phase: 5 X 2.5mm² + 2 X 0.5mm²
- 32A Single phase;3 X 6mm²+ 2 X 0.5mm²
- 32A Three phase;5 X 6mm²+ 2 X 0.5mm²
|
 | 16A 32A Type 2 EV AC Charging male socket for EV side - Rated current: 16A/32A
- Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option
- Operation Temp.:-30℃ ~ + 50℃
- IP protection class: IP 54 ( working condition)
- Product description: This Type 2 AC Charging Socket Vehicle Side, also Know as AC Charging Inlet Socket, can be installed on the Type 2 Electric Vehicle.
|  Model selection and the standard wiring - 16A Single phase; 3 X 2.5mm² + 2 X 0.5mm²
- 16A Three phase: 5 X 2.5mm² + 2 X 0.5mm²
- 32A Single phase;3 X 6mm²+ 2 X 0.5mm²
- 32A Three phase;5 X 6mm²+ 2 X 0.5mm²
|
 | 16A 32A Type 2 EV AC Charging Inlet Socket Vehicle Side - Rated current: 16A/32A Three Phase
- Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option
- Operation Temp.:-30℃ ~ + 50℃
- IP protection class: IP 54 ( working condition)
- Product description: This Type 2 AC Charging Inlet Socket Vehicle Side, also Know as AC Charging Inlet Socket, can be installed on the Type 2 Electric Vehicle.
|  Model selection and the standard wiring - 16A Single phase; 3 X 2.5mm² + 2 X 0.5mm²
- 16A Three phase: 5 X 2.5mm² + 2 X 0.5mm²
- 32A Single phase;3 X 6mm²+ 2 X 0.5mm²
- 32A Three phase;5 X 6mm²+ 2 X 0.5mm²
|
IEC Type 2 Connector
IEC 62196-2 connectors are used for charging electric vehicles, mainly in Europe. Because it was declared a standard by the EU. Based on the widely available red IEC 60309 three-phase plug with five pins. Depending on the maximum current there are different diameters (most commonly 16A and 32A), so a single size was chosen. Because the maximum possible power will be communicated to the car via two additional communication pins and a simple resistor code inside the cable. The onboard charger in the car must limit the current accordingly.
The connector is round with a flat top edge. The initial design specification comes with an output electrical power of 3-50 kW for charging battery electric vehicles using single-phase (230V) or three-phase (400V) alternating current (AC). In general, the typical maximum power is 32A 7.2 kW using single-phase AC and 22 kW using three-phase AC. The plug has an opening on the side so that both the car and the charger can automatically lock the plug. To prevent unnecessary charging interruptions or cable theft.
Top quality at the best price
Maximum efficiency
Get maximum charging performance with a superior quality cable (poor quality cables increase losses, lengthen charging times and consume more energy).
Long life
The high quality of the materials and the robustness of the connectors used ensure a long service life of the charging cable under all operating conditions.
Individually tested
Each charging cable is tested by e-Station before shipment to ensure the absence of any defects and thus avoid potential problems with the electric vehicle and/or charging station.
Indoor and outdoor use
The charging cable can be used in all weather conditions, indoors or outdoors, without affecting the functional and safety features.
Different lengths available