Automatic Start Generator Controller Dse5110
Deep Sea Dse5110
Deep Sea Dse5110 Generator Controller
Quality warranty and best service
1)DESCRIPTION:
The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal.
The Model 5110 is an Automatic Engine Control Module. The module is used to automatically start and stop the engine,indicating the operational status and fault conditions by means of an LCD display and a flashing LED on the front panel.
Selected operational sequences, timers and alarms can be altered by the user.
Alterations to the system are made using the 55xx configuration software with the 810 interface and a PC. This interface also provides real time diagnostic facilities.
It is also possible to monitor the operation of the system either locally or remotely.
Access to the module is protected by PIN number to prevent unauthorised access.
2)FEATURES:
Micro-processor based design PC or front panel configuration
Automatic engine starting and stopping
Automatic shutdown on fault condition
Custom graphical icon type display
Provides engine and generator instrumentation
Provides engine alarms and status information
Front panel configurable inputs,outputs, alarms and timers.
LED & LCD alarm indication Compatible with 5200 series modules for easy upgrade path.
3)Control Features:
emergency parking control
automatic car plate
start delay control
local manually start / shutdown
remote automatic start / shutdown
start the motor from the automatic control
control of warm-up
warm Control
Cold Control
Parking / Idle Speed Control
4)Protection:
lubricants to protect lower
charger fail rechargeable
emergency generating units down
generating units of public alarm
generator over-voltage under-voltage over-current protection
high cooling water temperature protection
engine overspeed protection
failure of the engine shutdown
start the engine failure
=====================================================================
5)The chart of DSE5110:
Power Supply | 8 to 35 Vdc Continuous |
Cranking Dropouts: | Able to survive 0 V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V without the need for internal batteries. |
Max Current | Operating 320mA at 12V, 215mA at 24V; Standby 175mA at 12V, 95mA at 24V |
Start Relay Output: | 16 Amp DC at supply voltage. |
Fuel Relay Output: | 16 Amp DC at supply voltage. |
Auxiliary Relay Outputs: | 5 Amp DC at supply voltage. |
Charge Fail / Excitation Range | 0 V to 35 V |
Alternator Input Range: | 15V(ph-N) to 300V(ph-N) 3 Phase 4wire AC (+20%) |
Alternator Input Frequency: | 50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N) |
Magnetic Pick-up Voltage Input Range: | +/- 0.5 V to 70 V Peak |
Magnetic Input Frequency: | 10,000 Hz (max) at rated engine speed |
Operating Temperature Range: | -30 to +70°C |
Panel Cutout: | 220mm x 160mm ( 8.7” x 6.3” |
6)We also provide other relative models as follows:
Relative Item NO. | DSE501K | DSE701AS | DSE701MS | DSE702AS | DSE702 MS | DSE704 |
Relative Item NO. | DSE5210 | DSE5120 | DSE5110 | DSE720 | DSE710 |