Vehicle Weighing Steel Deck Weighbridge Automatic Power-on Reset Institutions
Different sizes can be grouped: 3× 8m, 10m, 12m, 14m, 16m, 18m, 20m, 22m, 24m
Max. capacity available: 60t, 80t
2.5 sets of 18m can be loaded in one 20' GP, greatly save your freight cost.
Features
1. 8mm chequer plate a gap of 80cm in the middle
2. Each module with 3pcs U beams, bottom sealed
3. Mounting heigh: 370mm
4. All the modules and cross beams are interchangeable.
5. Load cells can be installed inside the cross beams, much more convenient and easier for your installation at site.
6. with OIML R60 approved KELI ZSFY-A-30T
7. 2.5 sets of 18m can be loaded in one 20' GP, greatly save your freight cost.
Other information about the truck scales:
Overload: For test the weighing bridge, the max load is 125% of full span, in this weighing range ,the restorability of the scale body is not change, and in the range of 150% of full span, it is safe, and we use 60% of full span to calibrate the scale
Welding: We use gas shield welding as our weld type , it protects the scale body and improve the welding quality effectively
Painting: We sandblast the scale first, and then paint the truck scale with anti-rust primer as a base, with a thickness of 60um. Then we do two layers of acrylic acid grey painting in 40um thick. The whole thickness of the painting is 100-120um.