Farm Irrigation More Protection DC Solar Pump Controller With Solar Panel
Protection features
Electronic monitoring gives the controller the capability to monitor the system and automatically shut down in the event of:
1. Dry well conditions-- with low level switch
2. Bound pump-- with auto-reversing torque
3. High voltage surge
4. Low input voltage
5. Open motor circuit
6. Short circuit
7. Over heat
This controller provides motor overload protection by preventing motor current from exceeding rating current and by limiting the duty cycle in the event of low water level. This controller does not provide over temperature sensing of the motor.
Item Technical Parameters
Rated Voltage: 36 VDC
Max Open Voltage: 80 VDC
Under Protection Voltage: 20 VDC
Over Protection Voltage: 68 VDC
Rate Current: 15 A
Over Protection Current: 18 A
Peak Protection Current :20 A
MCU and Controller Mode: 32bit MCU / FOC / Sine Wave Current / MPPT
Shell :Die-cast Aluminum
Dimension: 197mm*190mm*98mm
Weight: 2.1kg
Cooling Mode: Heat Dissipation by Fans
Operating temperature: -20℃ - +50℃
Storage conditions: -20℃ - +80℃/5~85%RH(No condensation)
Operating mode: S1 (Continuous working)
Typical application