Supper Power Air Conditioner Elevator Spare Parts Without Water Leak , SN-CAC SERIES

Brief Installing introduction:

1 . the main machine of the elevator air conditioner are installed on the upper beam of the
elevator or fix by the rack to the upper beam.

2 . open an 200mm hole on the elevator car top for returning air.

3 . Tear off the original fan, heat insulating dealing to the car top interlayer, fix the subsidiary to
the fan opening.

4 . lead the core of the remote receiving probe to car and fix it ;

5 . connect the copper pipe,condensate water pipe and electricity wire between the major
machine and the subsidiary ;

6 . screw open the adjust vavle, discharge the air in the pipe and screw tight it ;

7 . Connect the power supply, use remote controller to set the running mode of “program
control”, the air conditioner goes into auto running mode

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.