High Quality Elevator Lift Roller Guide Shoe For Elevator Lift Parts

Guide shoe installation requirements
The installation method of guide shoe is to put it on the installation position of the guide rail of the car frame. After finding the right position, use the bolt fix it on the car guide rail frame. The installation must meet the following requirements:

When the upper and lower guide shoes are installed in the right position, they should be on the same vertical line. No slant or deflection is allowed. Both roller guide shoes and fixed guide shoes same requirement.
Fixed guide shoes are mainly used for FOVF units, the clearance between the two sides should be consistent, and the clearance between the inner lining and the rail top should be within O. 5 ~ 2 mm

Rated Speed CAR(m/s)	0.4
Rated Speed CWT(m/s)	/
Width of Guide Rail K(mm)	10/16
Force /Fx(N)	2000
Fore /Fy(N)	800
Applied Oil Cup	/

Rated Speed CAR(m/s)	0.4
Rated Speed CWT(m/s)	1
Width of Guide Rail K(mm)	10/16
Force /Fx(N)	2000
Fore /Fy(N)	800
Applied Oil Cup	/

Rated Speed CAR(m/s)	0.4
Rated Speed CWT(m/s)	0.4
Width of Guide Rail K(mm)	5/10/16
Force /Fx(N)	1000
Fore /Fy(N)	1000
Applied Oil Cup	/

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.