Elevator group control board / unintended car movement protection board / audio chimer

DC24V Elevator Control Board Unintended Car Movement Protection Board , Audio Chimer

Model	Product	Size	Specification
SN-MT70-CHM-B Audio Chimer			External speaker,adjustable volume. DC24V input,Modbus communication protocol. Reminder the state and positional of the elevator. Prompt the state and position of the elevator,two-channel speaker to improve the broadcast sound quality. Smart reminder the elevator status and location. Support the control board to choose the language,and support user-defined voice packets and customizable prompt voice.
SN-MT70-AOB-C (unintended car movement protection board)			Can realize car unintended movement detection. Can realize door lock short detection. Achieve re-leveling and door advanced open functions. Re-leveling sensors shall be NO style. Three or four sensor signals are compatible to input.
SN-MT70-GCB-A Group control board			Can group control 3-8 sets of elevators and meet various requirements. Distribute floor call signal in principle of min.time of customer waiting,increase elevator working efficiency. High speed and reliable transmission is realized by CANBUS series communication. Abnormal running can be switched over automatically. Recover group control automatically. Equipped with LCD keypad and host monitor can be selected to achieve remote monitor and adjustment. In function of Ethernet communication and select IE card, also liquid crystal diasplay is provided.

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?