Elevator alarm, elevator emergency call, elevator arrival charm with elevator parts / elevator accessories

DC 24V Elevator Emergency Call Elevator Arrived Charm High Performance ISO9001

Ⅰ.Main parameters and use environment:

Ⅱ.Instruction:
1,Arrived charm is active trigger mode；
2,Power supply wiring such as shell identification；
3,T1 and T2 connections do not differentiate polarity,the station bell announces "ding dong" when the signal is input.

Ⅲ.Installation size:
Specific dimensions of FXIA4DAB arrived charm are marked in figure 1,can be installed according to the height of the requirements in the ①,②

Ⅳ.Products and wiring mode:
The product appearance is shown in figure 2,the back is 4P wiring terminal, as shown in figure 3.

Ⅴ.Notes:
1,Note that the supply voltage should not exceed the rated voltage,under special circumstances, please contact our technical department for consultation.
2,To ensure reliable triggering, the effective time of triggering signal should be more than 100ms；
3,In order to prevent interference, the signal line should be kept away from strong electricity to avoid triggering by mistake；
4,Repeat start time should be longer than playback time. When playback, the trigger signal is invalid..

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.