4.3-Inch Elevator LCD Display For Displaying Maintenance And Fire-Fighting Status
SN-HCB-T640 is a 4.3-inch graphic TFT, which can display running direction, floor, special functions and other various information of elevator to passengers, adding a sense of luxury to the building.
Feature and advantage:
It can be used for LOP display.
It can display floor, arrow, function icons, supporting RS485 interface.
It has 4-Pin 2.54mm USB to upgrade program and resources such as background pictures, floors, arrow pictures, etc.
It has up and down button interfaces which can support up to three physical buttons, as well as fire-fighting and lock interfaces.
Dimension
Parameters
Size | 4.3 inch | Voltage/current | DC18V~DC36V |
RTC | none | Speaker | none |
Display area(mm) | 95.04*53.86 | Color depth | RGB666(64k) |
Brightness | 250 | Resolution | 480*272 |
Display angle | 60-70-70-70 | Working environment | -20~70℃,10~90%RH |
Contrast | 500:1 | Storage environment | -30~80℃,10~90%RH |
Function introduction
Interface display function | Real-time display of elevator running floor and direction status. The arrows can be set as static arrows or dynamic arrows, and the dynamic arrows have four-scro-llingspeedtoadjust. |
Alarm display function | Receive control cabinet signals in real time, and display alarm information such as "maintenance", "failure", "lock,"fire fighting","full load", "emergency operation". |
Picture play function | Playing pictures (png format) in a loop, and supporting up to 32 pictures with horizontal and vertical pictures total. |
Menu setting function | Enter the menu settings through the physical button, with settings for Chinese/English, LOGO, wel-come words,loading capacity, volume, address, etc.,which can be flexibly configured according to customer needs. |
Information display function | Customer's logo can be displayed and modified. Welcome words in image format can be displayed and modified. Loading capacity can be selected by button-type menu, please refer to the appendix "Loading capacity setting instruction table". |
interface switching function | There are two built-in interfaces, Chinese vertical display and English vertical display, which can be selected through the button-type menu. |
USB update function | Interface themes and pictures can be updated through 5-pin USB. |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.