Glass Handrail Track Floor Groove Guardrail Surface Mounted U-Slot Aluminum Alloy

Basic Information

Product Display



Handrails are practical and decorative protrusions that are usually installed on stairs, railings, balconies, etc., and are members of railings or railings (top surfaces) for people to hold on to when walking.
The material is mostly wood, but also metal, plastic, terrazzo, marble and so on. It is required to be safe, firm, beautiful, smooth surface without sharp edges and corners.
The form can be arbitrarily designed, but the width is based on the principle of being comfortable to hold, generally 40-60mm, and the maximum width should not exceed 95mm, and it should be continuously set along the full length of the stairs and stair landings.



(1) Handrail (balustrade)
A general term for apron panels, inner covers, baseboards, outer covers, outer decorative panels and handrail turning ends that are not on both sides of an escalator or moving sidewalk pedal. There is no moving handrail on the upper part, and there is a control box near the entrance and exit. The turned-back part of the moving handrail belt at the end of the handrail is called the handrail turning end.
(2) Handrail (iamdrail)
Also known as "handrail tape". It is a moving part that is installed on the escalator or moving sidewalk railing and can move in the running direction for passengers to hold by hand. Generally, synthetic rubber and fabric are used as the main materials, which have small flexibility and are not easy to break. Divided into: multi-layer fabric cushion belt, fabric clip steel belt and clip wire rope fabric belt. It is located on both sides of the steps and moves in the same direction and at the same speed as the steps. The width is 80~90mm, the thickness is 10mm, and the relative speed tolerance of the steps is 0~+2mm. [6]
(3) Armchair
The back chair with armrests is referred to as "armchair". In design and production, it has more armrests on both sides than the general back chair. Therefore, it is richer and more varied in shape than the general chair. When the backrest of the armchair arrived in the Qing Dynasty, it was extremely rare to design the backrest according to the natural curve of the human body, and most of the backrests and armrests were vertical up and down. There are many subdivided small types of armchairs, such as rose chairs, official hat chairs, Taishi chairs, etc.

Certificates and Honors



Factory display





Company Profile

Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.

The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!

FAQ

Q: What is your MOQ?
A: Usually the MOQ for each sign aluminum extrusion profile is 500kg, but it will vary according to the size

Q: What about the delivery time?
A: Average 12 working days, 7 days for mold opening, 10 days for mass production

Q: How do you ship your goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. Usually it takes 3-5 days to arrive. Air and sea shipping are also optional.