503048 Lithium Polymer Battery 750mAh 3.7V With Stable Performance
Product performance:
1. High working voltage for single battery cells
2. Pollution-free
3. Long cycle life
4. No memory effect
5. PCM inside with short-circuit protection function,over-discharge, over charge, over current protection
6. Good consistency, low self discharge
7. Light weight, small and customized size
8. Wide application for electronics and industry
Li-polymer Battery List
Type | Max Thickness (mm) | Max Width (mm) | Max Length (mm) | Voltage (V) | Capacity (mAh) | Weight (g) |
Li-P401017 | 4.2 | 10.5 | 17.5 | 3.7 | 40 | 1.5 |
Li-P401020 | 4.2 | 10.5 | 20.5 | 3.7 | 50 | 1.5 |
Li-P401215 | 4.2 | 12.5 | 15.5 | 3.7 | 40 | 1.5 |
Li-P401230 | 4.2 | 12.5 | 30.5 | 3.7 | 120 | 4.0 |
Li-P401225 | 4.2 | 12.5 | 25.5 | 3.7 | 90 | 3.3 |
Li-P401525 | 4.2 | 15.5 | 25.5 | 3.7 | 110 | 3.7 |
Li-P402025 | 4.2 | 20.5 | 25.5 | 3.7 | 150 | 4.5 |
Li-P402030 | 4.2 | 20.5 | 30.5 | 3.7 | 200 | 5.8 |
Li-P431223 | 4.5 | 12.5 | 23.5 | 3.7 | 70 | 2.8 |
Li-P457585 | 4.2 | 75.5 | 85.5 | 3.7 | 3000 | 48.0 |
Li-P483030 | 5.0 | 30.5 | 30.5 | 3.7 | 380 | 6.6 |
Li-P501230 | 5.2 | 12.5 | 30.5 | 3.7 | 130 | 4.2 |
Li-P502030 | 5.2 | 20.5 | 30.5 | 3.7 | 250 | 6.0 |
Li-P503030 | 5.2 | 30.5 | 30.5 | 3.7 | 430 | 8.7 |
Li-P503040 | 5.2 | 30.5 | 40.5 | 3.7 | 550 | 12.5 |
Li-P503048 | 5.2 | 30.5 | 48.5 | 3.7 | 700 | 13.6 |
Li-P503759 | 5.2 | 37.5 | 59.5 | 3.7 | 1200 | 24.0 |
Li-P505062 | 5.2 | 50.5 | 62.5 | 3.7 | 2000 | 35.0 |
Li-P505573 | 5.2 | 55.5 | 73.5 | 3.7 | 2500 | 40.0 |
Li-P552035 | 5.7 | 20.5 | 35.5 | 3.7 | 350 | 6.5 |
Li-P552535 | 5.7 | 25.5 | 35.5 | 3.7 | 450 | 10.0 |
Li-P552730 | 5.7 | 27.5 | 30.5 | 3.7 | 380 | 6.6 |
Handling of tabs
The battery tabs are not so stubborn especially for aluminum tab.
Don’t bend tab.
Do not bend tabs unnecessarily.
Prohibition short circuit
Never make short circuit cell. It generates very high current which causes heating of the cells
and may cause electrolyte leakage, gassing or explosion that are very dangerous.
The LIP tabs may be easily short-circuited by putting them on conductive surface.
Such outer short circuit may lead to heat generation and damage of the cell.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the
battery pack.
Mechanical shock
LIP cells have less mechanical endurance than metal-can-cased LIB.
Falling, hitting, bending, etc. may cause degradation of LIP characteristics.
Performance Curves of Lithium Cell:
1.Lithium Cell Charge Curve (Charge at 1C)
2. Lithium Cell Discharge Curve (Discharge at 1C )
3. Lithium Cell Cycle Life Curve
Do you know Lithium Battery Maintenance Tips?