Single Layer Paper Machine Clothing Dryer Section Synthetic Press Felt
Product Detail:
Single Layer BOM Felt | ↗ | Single layer Forming BOM Felt |
— | Single layer Press BOM Felt | |
— | Single Layer Top BOM Felt | |
↘ | 1.5 layer BOM Pulp (Paper ) Felt |
Paper Machine : | Cylinder ,Super Forming ,Fourdrinier,Inclined Wire Machine ,Nip wire Machine etc for forming section felt ,press felt. |
Machine Velocity: | ≤800m/min |
Paper: | ≥8g/m³ kinds of paper |
NIP: | ≤80kn/m |
Sigle Layer BOM Technical Parameter: | |
Felt GSM: | 700-1200g/m² |
Felt GSM Tolerance: | ≤±4% |
Air Permeability: | 30-120cfm |
Tensile Strength: | ≥2000N/5m |
Elongation Percentage: | ≤1% |
Width Variation: | ≤±2cm |
Introduction:
BOM Felt is consists of base layer fabric and fiber layer. Base layer is woven from synthetic filament or multi-filament.
The structure is designed based on different paper machines, different press positions and different paper kinds GSM. Fiber layer is consisted of different laps of fiber webs and different diameters of fibers for the best trainability and fiber support indexes. BOM felt is widely applied to different kinds of paper making machines.
Also they are used for dewatering purpose from wet paper conveyed from the forming section in paper machine, smoothing the surface, and transferring the paper without blemishes. The felts are generally made of batt layer and fiber layer used for different PM. Each felt is customized for PM based on below data.
1. PM speed
2. Paper grade
3. Paper weight
4. Sketch of press section
5. Felt corresponding size
6. Felt original size
7. Used position
Advantage: