ZT-TEK Hybrid Microgrid with LFP Energy Storage for Remote Communities 5kW 10kWh system
ZT-ESSPLUS-5-51200
5kW PCS
10.24kWh lithium-ion battery energy storage system
AC 400V output
A hybrid microgrid integrates both renewable energy (like solar) and backup generators for reliability. In this system, LFP batteries provide a robust energy storage solution that helps balance supply and demand. During periods of high solar generation, the LFP batteries store excess energy for later use. When solar output is insufficient, the batteries can discharge stored energy to maintain a stable power supply. Their high charge/discharge efficiency and long lifespan make them an ideal choice for hybrid systems that require seamless power transitions.
Example Use Cases:
Remote Communities: Microgrids with solar, batteries, and generators are ideal for remote communities that are off the main grid, reducing reliance on expensive fuel deliveries for generators and improving sustainability.
Industrial Sites and Military Bases: In places where continuous power is essential and grid reliability is low, microgrids can ensure uninterrupted operation.
Urban Applications: Microgrids can be deployed in urban areas to improve resilience against blackouts and enable integration of renewable energy sources into the grid.
OFF-Grid |
Model |
ZT-ESSPLUS-5-51200 |
System parameter |
Output Voltage |
AC, 3Phases,400/230V |
|
Output frequency |
50Hz/60Hz |
|
Rated output power |
5kW |
|
Max output power |
6kW |
|
Overload capacity |
10kW,10s |
|
Rated output Current |
7.3A |
|
Max output Current |
10.8A |
|
Communication |
WIFI |
|
|
|
PV side |
Config. |
13pcs *600wp |
|
Input Power W |
7800 |
|
Input DC current |
13.58A |
|
Input DC voltage |
574.47V |
|
MPPT |
2 |
|
|
|
Battery side |
Type |
LFP |
|
Voltage |
51.2V |
|
Capacity |
10.24kWh |
|
Charging current |
100A |
|
Discharging current |
100A |
|
BMS |
Included |
|
Communication between BMS & PCS |
RS485 |
|
|
|
Grid / Generators |
Input voltage |
AC, 3Phases,400/230V |
|
Input current |
7.3A |
|
Max input current |
10.8A |
|
Frequency |
50Hz, 60Hz |
|
Power |
No less than 5kW |
|
|
|
EPS function |
|
Yes |
Protections |
|
PV Input Lightning Protection, Anti-islanding Protection, PV String Input Reverse Polarity Protection,
Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection,
Output Shorted Protection |