ZT-TEK ONE STEP SOLUTION FOR MICROGRID
12kw 14kwh Energy-Independent Microgrid for Remote Communities
Microgrids in remote communities use solar power combined with LFP batteries to create a sustainable and energy-independent solution. The LFP batteries store solar energy during peak production hours and discharge it when demand is high or when the sun isn’t shining. This enables the community to avoid relying on the grid or expensive diesel generators. With LFP batteries, these microgrids offer enhanced safety, longevity, and performance, providing continuous power with minimal maintenance requirements.
Example Use Cases:
Remote Communities: Microgrids with solar, batteries, and generators are ideal for remote communities that are off the main grid, reducing reliance on expensive fuel deliveries for generators and improving sustainability.
Industrial Sites and Military Bases: In places where continuous power is essential and grid reliability is low, microgrids can ensure uninterrupted operation.
Urban Applications: Microgrids can be deployed in urban areas to improve resilience against blackouts and enable integration of renewable energy sources into the grid.
OFF-Grid | Model | ZT-ESSPLUS-12-51280 |
System parameter | Output Voltage | AC, 1Phase, 220V ~ 230V |
| Output frequency | 50Hz/60Hz |
| Rated output power | 12kW |
| Max output power | 12kW |
| Overload capacity | 21.6kW , 10S |
| Rated output Current | 43.47A |
| Max output Current | 52.17A |
| Communication | WIFI |
| | |
PV side | Config. | 24pcs*600wp |
| Input Power W | 14400 |
| Input DC current | 14.96A + 14.96A (2 Channels) |
| Input DC voltage V | 481.32V (2 Channels) |
| MPPT | 2 |
| | |
Battery side | Type | LFP |
| Voltage | 51.2V |
| Capacity | 14.336kWh |
| Charging current | 140A |
| Discharging current | 140A |
| BMS | Included |
| Communication between BMS & PCS | RS485 |
| | |
Grid / Generators | Input voltage | AC, 1Phase, 220V ~ 230V |
| Input current | 43.47A |
| Max input current | 52.17A |
| Frequency | 50Hz/60Hz |
| Power | No less than 12kw |
| | |
EPS function | | Yes |
Protections | | PV Input Lightning Protection, Anti-islanding Protection, PV String Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Shorted Protection |