ZT-TEK On-Grid Microgrid with LFP Energy Storage 10kw 16kwh
10kW AC output
16kwh Lithium-ion battery energy storage system (can be expanded)
In a on-grid microgrid, LFP batteries enhance energy efficiency by storing surplus power generated by solar panels during the day and discharging it when demand is higher or when solar generation is low. This reduces the need to draw power from the grid, lowering energy costs and providing backup power in case of grid failures. The high charge and discharge efficiency of LFP batteries ensures that energy is used optimally, maximizing both cost savings and sustainability in the microgrid system.
Example Use Cases:
Remote Communities: Microgrids with solar, batteries, and generators are ideal for remote communities that are off the main grid, reducing reliance on expensive fuel deliveries for generators and improving sustainability.
Industrial Sites and Military Bases: In places where continuous power is essential and grid reliability is low, microgrids can ensure uninterrupted operation.
Urban Applications: Microgrids can be deployed in urban areas to improve resilience against blackouts and enable integration of renewable energy sources into the grid.
Data sheet
| Model | ZT-ESSPLUS-10-51314 |
System parameter | Output Voltage | AC, 3Phases,400/230V |
| Output frequency | 50Hz/60Hz |
| Rated output power | 10kW |
| Max output power | 12kW |
| Overload capacity | 18kW,10S |
| Rated output Current | 14.5A |
| Max output Current | 21.7A |
| Communication | WIFI |
| | |
PV side | Config. | 25PCS *600WP |
| Input Power W | 15000 |
| Input DC current | 13.58A + 13.58A (2 channels) |
| Input DC voltage | 574.47V & 530.28V (2 channels) |
| MPPT | 2 |
| | |
Battery side | Type | LFP |
| Voltage | 51.2V |
| Capacity | 16.076kWh |
| Charging current | 157A |
| Discharging current | 157A |
| BMS | Included |
| Communication between BMS & PCS | RS485 |
| | |
On-Grid / Generators | Input voltage | AC, 3Phases,400/230V |
| Input current | 14.5A |
| Max input current | 21.7A |
| Frequency | 50Hz, 60Hz |
| Power | No less than 10kW |
| | |
EPS function | | Yes |
Protections | | PV Input Lightning Protection, Anti-islanding Protection, PV String Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Shorted Protection |