ZT-TEK ONE STEP SOLUTION FOR MICROGRID
Microgrid 5kw 10kwh -with photovoltaic, with LFP battery bank, with PCS and MTTP
A microgrid is a localized energy system that can function independently or alongside the main grid. It typically integrates renewable energy sources like solar power, battery storage, and backup generators. The Lithium Iron Phosphate (LFP) batteries in these systems are key to optimizing energy storage, offering a safe and efficient solution for storing excess solar power. Their long cycle life and thermal stability ensure that stored energy can be reliably discharged when needed, even during extended cloudy days or grid outages, providing energy security to the community.
Example Use Cases:
Remote Communities: Microgrids with solar, batteries, and generators are ideal for remote communities that are off the main grid, reducing reliance on expensive fuel deliveries for generators and improving sustainability.
Industrial Sites and Military Bases: In places where continuous power is essential and grid reliability is low, microgrids can ensure uninterrupted operation.
Urban Applications: Microgrids can be deployed in urban areas to improve resilience against blackouts and enable integration of renewable energy sources into the grid.
OFF-Grid |
Model |
ZT-ESSPLUS-5-51200 |
System parameter |
Output Voltage |
AC, 1Phase, 220V ~ 230V |
|
Output frequency |
50Hz/60Hz |
|
Rated output power |
5kW |
|
Max output power |
6kW |
|
Overload capacity |
10kW, 10s |
|
Rated output Current |
21.73A |
|
Max output Current |
26.08A |
|
Communication |
WIFI |
|
|
|
PV side |
Config. |
13pcs * 600wp |
|
Input Power W |
7500 |
|
Input DC current |
13.58A + 13.58A (2 Channels) |
|
Input DC voltage V |
309V & 265V (2 Channels) |
|
MPPT |
2 |
|
|
|
Battery side |
Type |
LFP |
|
Voltage |
51.2V |
|
Capacity |
10.24kWh |
|
Charging current |
100A |
|
Discharging current |
100A |
|
BMS |
Included |
|
Communication between BMS & PCS |
RS485 |
|
|
|
Grid / Generators |
Input voltage |
AC, 1Phase, 220V ~ 230V |
|
Input current |
21.73A |
|
Max input current |
26.08A |
|
Frequency |
50Hz/60Hz |
|
Power |
No less than 5kw |
|
|
|
EPS function |
|
Yes |
Protections |
|
PV Input Lightning Protection, Anti-islanding Protection, PV String Input Reverse Polarity Protection,
Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection,
Output Shorted Protection |