ZT-TEK ONE STEP SOLUTION FOR MICROGRID
Microgrid with solar and battery 6kw 14kwh one step solution
In a solar-powered microgrid, LFP batteries serve a critical role by storing excess solar energy generated during the day for use at night or during cloudy periods. Unlike traditional lead-acid batteries, LFP batteries are more durable, require less maintenance, and are less prone to thermal runaway. This makes them an ideal choice for microgrid systems, ensuring reliable power during grid failures or low sunlight hours, all while supporting sustainability and reducing reliance on fossil fuels.
Example Use Cases:
Remote Communities: Microgrids with solar, batteries, and generators are ideal for remote communities that are off the main grid, reducing reliance on expensive fuel deliveries for generators and improving sustainability.
Industrial Sites and Military Bases: In places where continuous power is essential and grid reliability is low, microgrids can ensure uninterrupted operation.
Urban Applications: Microgrids can be deployed in urban areas to improve resilience against blackouts and enable integration of renewable energy sources into the grid.
OFF-Grid | Model | ZT-ESSPLUS-6-51280 |
System parameter | Output Voltage | AC, 1Phase, 220V ~ 230V |
| Output frequency | 50Hz/60Hz |
| Rated output power | 6kW |
| Max output power | 7.2kW |
| Overload capacity | 12kW, 10S |
| Rated output Current | 26.08A |
| Max output Current | 31.3A |
| Communication | WIFI |
| | |
PV side | Config. | 15pcs* 600wp |
| Input Power W | 9000 |
| Input DC current | 13.58A + 13.58A (2 Channels) |
| Input DC voltage V | 309V & 353V (2 Channels) |
| MPPT | 2 |
| | |
Battery side | Type | LFP |
| Voltage | 51.2V |
| Capacity | 14.336kWh |
| Charging current | 140A |
| Discharging current | 140A |
| BMS | Included |
| Communication between BMS & PCS | RS485 |
| | |
Grid / Generators | Input voltage | AC, 1Phase, 220V ~ 230V |
| Input current | 26.08A |
| Max input current | 31.3A |
| Frequency | 50Hz/60Hz |
| Power | No less than 6kw |
| | |
EPS function | | Yes |
Protections | | PV Input Lightning Protection, Anti-islanding Protection, PV String Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Shorted Protection |