3TNV68 Full Gasket kit for Yanmar Engine Parts 719643-92602

Introduction to materials and uses

3TNV86 is a diesel engine model commonly used in equipment such as agricultural machinery, construction machinery, and generator sets. A gasket kit is a collection of gaskets installed on an engine to fill and seal various joints in the engine.
The main function of the gasket kit is to ensure the sealing and normal operation of the engine. They are usually installed on the engine's cylinder block, cylinder head, intake manifold, water pump, oil pan, valve cover and other parts to prevent liquid, gas and pressure from leaking or penetrating into the interior of the engine at these connection parts.
Gasket kits usually consist of multiple types of gaskets, such as metal gaskets, rubber gaskets, paper gaskets, etc. Each gasket has different materials and sealing properties to adapt to the needs of different connection parts. They are selected and installed according to the engine design and specifications to ensure engine reliability and durability under conditions such as high pressure, high temperature and high vibration.

Installation introduction

Installing the 3TNV86 gasket kit requires following certain steps and precautions. Since I am unable to provide detailed live graphic instructions, the following is an overview of the general gasket kit installation process. Please note that specific installation steps may vary depending on specific equipment and manufacturers, so it is recommended to refer to the relevant engine and equipment technical manuals or consult a professional technician before installation.
1. Preparation: Make sure you have the proper tools and safety gear. Read the relevant technical manual for specific gasket kit installation steps and specifications.
2. Remove the old gasket: First, carefully remove the old gasket, gasket residue and related parts according to the instructions in the technical manual. Make sure to clean the work area to ensure a quality installation of the new gasket.
3. Prepare the new gasket kit: Check the contents of the new gasket kit to make sure all gaskets are complete and meet specifications. Follow the instructions in the technical manual and perform pretreatment as necessary, such as lubricating or applying sealant.
4. Install new gaskets: Install new gaskets one at a time according to the instructions in the technical manual. Be sure to place each shim correctly and tighten the bolts to the specified torque and sequence.
5. Adjustment and inspection: After installing all gaskets, check the position and installation quality of the gaskets. Ensure that all sealing surfaces are aligned and flat, and that bolts are tightened to the specified strength.
6. System test: Reassemble other related parts, such as cylinder head, water pump, intake manifold, etc. Before starting the engine, perform a system test to make sure the gaskets are installed correctly and there are no leaks and other problems.

Company Profile