C10 Bulldozer Engine Piston for Caterpillar Parts 238-2710 133-7098

product description

Piston information:

C10 Overhaul Kit
C10 piston ring
C10 Piston Kit
C10 cylinder engine piston
C10 cylinder liner/sleeve
C10 Full Gasket Kit
C10 cylinder head gasket
C10 cylinder head
C10 cylinder block
C10 engine assembly
C10 Camshaft
C10 crankshaft
C10 intake valve
C10 exhaust valve
C10 crankshaft
C10 Oil pump
C10 Connecting rod
C10 main bearing group
C10 Connecting rod bearing set
C10 Fuel pump
C10 Fuel injection pump

Related engine products:

When using new cylinder liners and piston products, it is necessary to carefully check the specific dimensions of the accessories. If the size of the new liner and piston is ignored, it is easy to cause a mismatch between the liner and the piston. When the largest size cylinder is matched with the smallest size piston, the gap between the two will be too large and the compression will be weak.
1. Do not heat the piston with an open flame
In the process of installing the piston pin, the piston should be heated and expanded first, but it is not advisable to directly heat it on an open flame. Because the thickness of each part of the piston is uneven, when it is heated on an open flame, it will cause uneven heating, and it is easy to cause deformation. Therefore, the correct heating method is to put the piston into hot oil for heating.
2. Do not use emery cloth to polish the bearing bush
Scraping tiles is a job with relatively high technical content in the maintenance of construction machinery. Many repairmen will directly use emery cloth to polish in the process of scraping tiles because their own skills are not up to standard. However, in the process of grinding with emery cloth, the sand grains on the emery cloth are extremely easy to embed in the alloy, which accelerates the wear of the diesel engine journal.

Company Profile