ENT workstation unit is suitable for the comprehensive diagnosis and treatment of otolaryngology disease diagnosis and treatment, improve the efficiency of the doctor's work.
Specifications:
1. Treatment table-board:
Adopting advanced white marble and glass complex material, is easy to clean and disinfect, not easily scratched, appearance is beautiful, including writing station. (size:1830*720*810mm) .
2. Whole case is made by plastic model, high classical ABS material and ergonomics modeling, reasonable, environmental and beauty.
3. LED illuminating light :12V,10W
4. Built-in LED cold light source.
5. Laryngoscope preheating device: 450W, 0-180 seconds, adjustable
6. All set and parameters with power-off protection function.
Standard configuration | Optional configuration | ||
LED headlight | 1 | Imaging system | Endoscope |
Spray gun (it can match different function spray tips 3 pieces) | 1 | 1CCD/3CCD Camera 15 inch LCD monitor Computer (17inch LCD display / professional endoscope software) Pinter Fiber cable Hernia cold light source | 2.7/4mm, 0°/30° otoscope 2.7/4mm, 0°/30°nasoscope 8 /, 70°/90°laryngoscope Constant temperature rinsing system Powder spray gun ENT professional examination microscope |
Suction gun | 1 | ||
Blowing gun | 1 | ||
Laryngoscope pre - heater | 1 | ||
Blow - off equipment system (with warning system) | 1 | ||
Instrument tray | 2 | ||
Cotton cup | 4 | ||
Medical bottle | 8 | ||
Built-in waste tank | 1 | ||
Built-in equipment recycle tank | 1 | ||
Built-in immersion sterilization cup | 1 | ||
Doctor stool | 1 | ||
7 inch intelligent touched control system | 1 | ||
Vacuum pump | 1 | ||
Compressor | 1 |