Environmental Test Chambers Salt Spray Corrosion Test Chamber Lab Equipment

Features

The overall molding, corrosion resistance, shock, easy to clean and no leakage.

Tower spray system, the salt spray is uniformity and the settling volume is adjustable.

PVC or FRP cover could be optional, using PVC cover could clearly see the test samples and spraying situation in working chamber.

Water seal structure and no salt spray overflow.

The circuit control board and other components are fixed the location which is easy to check and maintain.

Control system

P.I.D Microprocessor temperature controller ensures a precise and reliable control, the resolution is ±0.1℃ .

Universal type: With domestic digital controller.

All circuits are equipped with circuit breakers and all heaters are equipped with overheating protection devices, Thedistribution

box is made of refractory resin.

Continuous or periodic spray optional and dual over-temperature protection, which is safe and reliable.

Safety Alarm

With electric leakage, overload protection.

With short circuit, shortage of water, over-temperature alarm.

Corresponding Standard:

GB11158 GB10589-89

GB10592-89

GB/T10586-89

GB/T2423.22-2001

GB/T2423.1-2001

GB/T2423.2-2001

GB/T2423.3-93

GB/T2423.4-93

ASTM D1735

IEC60068-2-1.1990

IEC60068-2-2.1974

IEC 68-2-30

IEC68-2-03

EIA - 364-31C

EIA - 364-59

ASTM B117

• operational approach:

1. Install the internal parts of the salt spray test chamber: tower spray device, funnel, round rod, V-shaped sample rack, etc.

2. Connect the air source, turn on the power switch after the power supply is connected.

3. Add water in the pressure barrel and the box, stop adding water after the two low water level lights are off, and add water to seal the sealing groove.

4, the purified water and sodium chloride salt in a ratio of 1:20. Pour the prepared solution into the test inlet (turn off the light of low salt water).

product description:

Our Company:

Shanghai BOTO GROUP LTD is a high technology company specializing in integrated incubation systems. We are conveniently located in Shanghai City.

With 20+ years of incubator R&D experience from our technical team, we have developed several series of the advanced integrated hatchery system.

Also we have gained the Authorized Poultry Industry R&D Center and been awarded the High-tech Enterprise by Chinese government. Also, both our company and products are approved by ISO9001, ISO14001, ISO45001, ISO50001

Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

Packaging Dimensions: (WxDxH) 1610*1050*1400mm

Power supply source: single-phase, 220V±10%, 50Hz (can be appointed)

Gross Weight: 150kg

HS Code: 8479899990