Equipment summary:
Xenon lamp aging testing chamber is a comprehensive climate testing machine, in addition to climatic aging test, the lightfastness of materials can be carried out to test, polymer materials exposed at simulated sunlight. It simulates thelight, temperature, rainfall, condensing, humidity to test the materials;it can beused for choosing new materials,improving existing materials, or assessment of change in material composition.
Technical parameter:
Model | ZME-2011 | |
Testing room D×W×H | 500*600*500mm | |
Index | Temperature range | RT+10℃~80℃ |
Humidity range | 65~98%R·H | |
Spray time | 1~9999min, adjustable | |
Spray cycle | 1-240min, interval adjustable | |
spectral wavelength | 290nm~800nm(60w/m2) | |
light source | xenon lamp(air-cooled) | |
Xenon lamp power | 1kw,6kw(longevity:1600H) | |
Temperature and humidity control | Time controller | Import controller from Moeller |
Accurate range | Temperature: ±0.1℃,/ humidity: ±0.1℃R·H | |
Sensor | Platinum resistance Pt100Ω/mv | |
Heating system | Independent system, nickel chromium alloy electric heating type heater | |
Humidity system | stainless steel, external Isolated humidifier | |
Blackboard temperature | Bimetal thermometer blackboard 55℃~75℃ | |
Water supply | Humidification water supply with automatic control, xenon lamp cooled by water recycling | |
Temperature controller | Import controller | |
humidity | Irradiation: 30%~65%RH darkly: up to 90%RH | |
Cycle system | low-noise air-conditioning-type motors, multi-leaf-type centrifugal wind wheel | |
Material | Outside material | Advanced spray color plate /SUS304 stainless steel |
Inside material | SUS304 stainless steel | |
Sample holder material | SUS304 stainless steel | |
insulation | High and low temperature aging of silicone rubber | |
Standard | a set of radiation-proof glass window, dynamic testing sample shelf 1, xenon lamp tube 2 | |
Protector | Leakage, short circuit, over-temperature, water shortages, motor overheating, over-current protection. | |
Power | AC380V±10% 50±0.5HZ , Three-phase five-wire system | |
Environmental temperature | ±5℃~+30℃ ≤85%R·H |
Equipment safety protection device:
1. Power overload, short circuit protection
2. ground protection
3. over temperature protection
4. Water shortage protection
5. In order to protect the equipment,All alarm will automatically cut off power supply, and with audible reminder
Operating conditions:
1. Temperature: 15℃~35℃
2. Relative humidity: less than 85%RH
3. Without strong vibration and strong electromagnetic field
4. Without high concentration of dust and corrosive materials in round field
5. No direct sunlight or other sources of heat radiation directly
6. Without a strong airflow around,when need forced air flow around,air should not be blown directly to the body
7. Test cases should be placed stably, level
8. The sides of the test chamber should keep a certain distance, convenient maintenance operation
9. Installation site well ventilated
10. Ground Benign
Corresponding standard:
GB12831-86 Vulcanized rubber artificial climate (xenon lamp) Aging Test Method
GB/T1644.2-1999Plastics laboratory light exposure test method
GB/T8427-89 textile color fastness test, resistance to artificial light fastness xenon arc
GB/T8430-98 textile color fastness test, resistance to artificial light fastness xenon arc
GB/T1865-97 Paints, varnishes, artificial weather aging and artificial radiation exposure
GB/T16991-97 textile color fastness test
GB/T5137.3-96 simulated climate test method of resistant to radiation, heat, humidity, burning
GB/T16259-96 color building materials, artificial climate accelerated aging test method.
GB/T2423.24-95 Electronic and Electrical Products Environmental Testing Part II: test method, testing
SQSimulation of solar radiation on the ground
Company profile
BOTO GROUP Ltd. is a private enterprise integrating r&d, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.