Temperature Humidity Rapid Change Tester Thermal Environmental Programmable High and low temperature test chamber
1. Product Name: Temperature and Humidity Test Chamber
2. Product Model:BT- GX-3000-LH
3. Description:
The thermal shock testing chamber is used for the temperature rapid change shock test for materials. The low and high temperature test storage tank can be guided into the test chamber for the rapid temperature change shock test. Also, the balance temperature control system and the wind circulatory system with the P.I.D control can ensure the stability of the system.
4.Technical Parameter:
Mode | BT-GX-3000-80L | BT-GX-3000-150L | BT-GX-3000-225L | BT-GX-3000-408L | BT-GX-3000-800L | BT-GX-3000-1000L | ||
Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 60×85×80 | 60×85×80 | 100×100×80 | 100×100×100 | ||
Outside Size W×H×D(cm) | 92×140×90 | 105×150×110 | 105×165×120 | 115×175×140 | 160×190×160 | 160x190x180 | ||
Volume (L) | 80 L | 150L | 225L | 408L | 800L | 1000L | ||
Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% | |||||||
Function | Fluctuation | ±0.5°C ±2.5%RH | ||||||
Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) | |||||||
Controller analytical accuracy | ±0.3°C ±2.5%RH | |||||||
Material | Inner Wall | SUS #304 Stainless steel | ||||||
Outer Skin | #SUS 304 Stainless steel | |||||||
Heat Preservation | High temperature resistant, High chlorine acid b vinegar foam insulation materials | |||||||
Wind Cycling Way | Centrifugal fan-broadband type forced air circulation | |||||||
Refrigeration Way | Single stage compression refrigeration | |||||||
Refrigerater | French Tecumseh | |||||||
Refrigerants | R4O4A USA dupont environmental protection refrigerant(R23+R404) | |||||||
Condensing Way | Air-cooled or water-cooled | |||||||
Heater | Nickel chrome heating wire heater | |||||||
Humidifier | Semi-closed steam and wet | |||||||
Water Suplying Way | Automatic cycling water supply | |||||||
Standard Accessories | 1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. | |||||||
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
COMPANY PROFILE