1. Product Name and Purpose

2. Product Features

Vibration Table

• Wide - Range Vibration Capability
  • The vibration table is capable of generating a broad spectrum of vibration frequencies, typically from 1 Hz to 2000 Hz. This wide range allows for the simulation of different types of vibrations that weapon equipment components may experience. For example, low - frequency vibrations can simulate the movement of vehicles transporting the equipment, while high - frequency vibrations can mimic the shockwaves from explosions or the recoil of firearms. The vibration amplitude can be precisely adjusted, with a range of 0.1 mm to 100 mm (peak - to - peak), enabling the reproduction of various levels of vibration intensity.
  • It can generate vibrations in multiple axes, including vertical, horizontal, and rotational axes. Weapon equipment components often experience complex three - dimensional vibration patterns. For instance, an electronic targeting system in a tank may be subjected to vibrations in different directions during the tank's movement over rough terrain. The multi - axis vibration capability of the table ensures a more realistic simulation of these real - world conditions.
• Customizable Vibration Profiles
  • Operators have the flexibility to create custom vibration profiles based on specific test requirements. These profiles can include continuous vibrations, intermittent shocks, or complex sequences that mimic the actual vibration scenarios weapon equipment components encounter. For example, a profile can be designed to simulate the vibrations during a military vehicle's off - road journey, including vibrations from driving over bumps, potholes, and through rough terrains, as well as the vibrations during sudden stops and starts.
• High Payload Capacity
  • Given the often - large and heavy nature of some weapon equipment components, the vibration table is designed with a high payload capacity. It can typically support loads ranging from a few kilograms to several tons, depending on the model. This allows for the testing of full - scale or representative components of weapon systems, ensuring that the test results are relevant and applicable to real - world situations.

Temperature Humidity Test Chamber

• Extensive Climate Simulation
  • The temperature humidity test chamber integrated with the vibration table can create a wide range of temperature and humidity conditions. The temperature can be adjusted from extremely low values, such as - 50°C to simulate arctic or high - altitude combat conditions, to high temperatures of up to + 80°C to mimic desert or tropical combat environments. The humidity control can maintain relative humidity levels from 10% to 95%, enabling the testing of how components respond to different moisture levels. This is crucial as high humidity can cause corrosion in metal components, while low humidity can lead to issues such as static electricity build - up in electronic components.
  • The chamber can also simulate rapid temperature and humidity transitions. In combat situations, weapon equipment may experience sudden changes in temperature and humidity, such as when moving from a cool, dry bunker to a hot, humid outdoor environment. The chamber can achieve temperature transition rates of up to 10°C/min and humidity transition rates of up to 5%/min, allowing for the testing of how components respond to these abrupt changes.
• Large and Uniform Test Volume
  • The temperature humidity test chamber features a large test volume, typically ranging from 5 m³ to 50 m³ or more, depending on the model. This spacious interior can accommodate large weapon equipment components or multiple smaller components simultaneously. The chamber is designed to provide uniform temperature and humidity conditions throughout the test volume, with temperature variations within ±1°C and humidity variations within ±5% relative humidity. This ensures that all parts of the tested components are exposed to the same environmental conditions, resulting in reliable and consistent test results.

Integrated Control and Monitoring

• User - Friendly Interface
  • The entire test system is controlled through a user - friendly interface that simplifies the operation process. The interface allows operators to easily set and adjust the test parameters for both the vibration table and the temperature humidity test chamber. It provides a clear display of the current test status, including vibration frequencies, amplitudes, temperature, humidity, and elapsed test time.
• Comprehensive Data Acquisition and Analysis
  • Equipped with a comprehensive data acquisition system, the test system records all relevant data during the test. This includes vibration measurements in multiple axes, temperature and humidity profiles, and any observed component failures or performance changes. The data can be stored in a secure database and analyzed using advanced software tools. The system can generate detailed test reports, including graphs, charts, and statistical analysis, to help engineers and researchers understand the test results and make informed decisions.
• Remote Monitoring and Control
  • Many models of this combined test system offer remote monitoring and control capabilities. This feature enables operators to monitor the test progress and adjust the test parameters from a remote location, such as a military testing facility control center or an off - site research office. It is particularly useful for large - scale testing operations or when immediate access to the testing system is not possible, allowing for continuous supervision and timely intervention.

3. Specific Parameters

• Vibration Table Parameters

  • Rated Sine Force	300kgf- 8000kg.f
    Frequency Range	DC-3000Hz
    Max. Displacement p-p	51-100mm
    Max acceleration	100g
    Max. Velocity (m/s)	2.0
    Max. Payload	300-5000kg

• Temperature Humidity Test Chamber Parameters

  • Model	CTHC-80	CTHC-150	CTHC-225	CTHC-408	CTHC-800	CTHC-1000
    Inside dimension(W x D x H) cm	40 x 50 x40	50 x 60 x 50	50 x 75 x 60	60 x 85 x 80	100 x 100 x 80	100 x 100 x 100
    Outside dimension(W x D x H) cm	95 x 140 x 95	105 x 150 x 105	105 x 165 x 115	115 x 175 x 140	155 x 190 x 140	155 x 190 x 160
    Internal material	#304 Stainless Steel
    External material	Powder coated #304 Stainless Steel
    Temperature range	+ 150℃~ - 70 ℃
    Humidity range	10% ~ 98% R. H
    Temperature Uniformity ℃	0.01
    Humidity Uniformity % R. H.	0.1
    Temperature stability ℃	±0.3
    Humidity stability % R. H.	±2
    High temperature ℃	100	100	100	100	100	100
    Heating time (min)	20	30	30	30	30	30
    Low temperature	0, -40, -70	0, -40, -70	0, -40, -70	0, -40, -70	0, -40, -70	0, -40, -70
    Cooling time (min)	20, 50, 70	20, 50, 70	20, 50, 70	20, 50, 70	20, 50, 70	20, 50, 70
    Air circulation system	Mechanical convection system
    Cooling system	Imported compressor, fin evaporator, gas condenser
    Heating system	Sus304 Stainless steel High-speed heater
    Humidification system	Steam Generator
    Humidification water supply	Reservoir, Sensor-controller solenoid valve, recovery-recycle system
    Controller	Touch panel
    Electrical power requirements	Please contact us for requirements of specific models
    Accessories	Multi-layer enhanced glass window,test hole, action indicator light, case lighting barrier shelf x2
    Safety device	Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light

4. Product Functions

• Reliability and Durability Testing
  • By subjecting weapon equipment components to combined mechanical vibrations and temperature humidity stress, the system helps manufacturers identify potential weaknesses and failure points. This allows for the improvement of product designs to enhance reliability and durability, reducing the risk of component failures during critical combat situations or long - term storage and transportation.
• Design Optimization
  • The data collected from the tests provides valuable insights into how weapon equipment components respond to different conditions. Engineers can use this information to optimize product designs, such as improving the structural integrity of mechanical parts, enhancing the heat dissipation capabilities of electronic components, or developing more moisture - resistant coatings for optical devices. For example, if an ammunition component shows signs of malfunction under high - humidity and vibration conditions, the design can be modified to improve its performance.
• Quality Control
  • The system serves as a crucial tool for quality control in the weapon equipment manufacturing industry. By testing components before they are integrated into weapon systems, manufacturers can ensure that they meet the required quality standards. This helps to prevent costly malfunctions and failures during actual combat, ensuring the effectiveness and safety of the weapon equipment.
• Compliance Testing
  • The weapon equipment industry is subject to strict military standards and regulations regarding the performance and reliability of components. The vibration table combined with the temperature humidity test chamber enables manufacturers to conduct compliance testing to ensure that their products meet these requirements. For example, military standards may specify the maximum vibration levels and temperature humidity ranges that weapon equipment components must withstand.

5. Production and Quality Assurance

• Stringent Manufacturing Process
  • The manufacturing of this combined test system follows strict quality control procedures. Each component, from the vibration table's drive system and the temperature humidity test chamber's sensors to the control electronics and structural frame, is sourced from reliable suppliers and undergoes thorough inspection and testing. The assembly process is carried out by highly trained technicians in a clean and controlled environment. The system is calibrated and verified at multiple stages during production to ensure its accuracy and performance.
• Quality Certification and Validation
  • Our test system has obtained relevant quality certifications, such as ISO standards for testing equipment and military - specific certifications. It has also been validated by independent testing laboratories to ensure that it meets industry standards and provides accurate and reliable test results. We continuously update and improve our product based on the latest technological advancements and customer feedback to maintain its high quality and performance.

6. Application Areas and Success Stories

• Electronic Fire Control System Testing
  • A military equipment manufacturer used the system to test an electronic fire control system. The system was subjected to a combination of multi - axis vibrations, extreme temperature changes, and high humidity conditions. The testing revealed that the system's circuit boards were prone to short - circuits under high - humidity and high - vibration conditions. By improving the circuit board's insulation and adding vibration - dampening components, the manufacturer was able to enhance the reliability of the fire control system, ensuring accurate targeting and firing in combat situations.
• Optical Sight Testing
  • A company manufacturing optical sights for firearms utilized the system to test the performance of its products. The optical sights were exposed to a variety of vibration and temperature humidity conditions. The testing showed that the sight's lenses were prone to fogging and distortion under rapid temperature and humidity transitions. By applying an anti - fog coating and improving the lens mounting structure, the company was able to improve the optical sight's performance, providing clear and stable vision for soldiers in combat.
• Ammunition Component Testing
  • A military ammunition manufacturer used the system to test the durability of ammunition components. The components were subjected to vibrations, temperature variations, and humidity changes to simulate the conditions they would experience during storage and transportation. The testing identified that the primer of the ammunition was sensitive to high - humidity environments, which could lead to misfires. By improving the primer's moisture - resistance and packaging design, the manufacturer was able to enhance the reliability of the ammunition, ensuring consistent and reliable firing.

7. Service and Support

• Pre - Sales Technical Consultation
  • Our team of military equipment testing experts provides in - depth technical consultations to help customers understand the capabilities and suitability of the system for their specific testing needs. We offer demonstrations and training sessions to familiarize customers with the operation and functionality of the system before purchase. We also assist in selecting the appropriate test parameters and accessories based on the weapon equipment components to be tested.
• After - Sales Service and Maintenance
  • We offer comprehensive after - sales service, including on - site installation and commissioning. Our team of experienced technicians is available for regular maintenance, calibration, and emergency repairs. We provide genuine spare parts and timely upgrades to ensure the long - term performance and reliability of the testing system. We also offer service contracts that include preventive maintenance and priority technical support.
• Training and Technical Support
  • We conduct training programs for new users to ensure they can effectively operate the testing system and interpret the test results. Our technical support team is available 24/7 to answer questions, provide troubleshooting assistance, and offer guidance on test method optimization. We also provide software updates and support for the data acquisition and analysis systems to keep the system up - to - date with the latest features and technologies.