• • Item	Specification
    Test temperature	0 ~ 500℃
    Temperature accuracy	± 1℃
    Opening diameter	25 mm
    Air flow	0 ~ 100 mm/s (adjustable)
    Power	AC 220 V, 50 HZ
    Dimension	L 1400 * W 600 * H 1900 (mm)
    Experimental part of the device	Furnace shell, Furnace tube, Inner tube, Sample disk, Heating jacket, Insulation, Thermal, Air source, Temperature control device, Automatic ignition device

3. Product Functions

• Accurate Material Flammability Assessment
  • The primary function of the test chamber is to provide a precise and quantitative evaluation of the flammability of automotive and transportation materials. By measuring key parameters such as flame spread rate and afterflame time, it determines the degree to which a material can resist the spread of fire. This information is crucial for manufacturers in selecting appropriate materials for vehicle interiors, where fire safety is a top priority. For example, in the case of seat upholstery, dashboard components, and door panels, materials with low flame spread rates and short afterflame times are preferred to minimize the risk of fire and ensure passenger safety.
  • In addition, the measurement of heat release rate helps in understanding the potential energy release of a material during combustion. This is especially important in evaluating the fire hazard of materials used in vehicle cabins, as a high heat release rate can lead to rapid fire growth and increased risk of injury or fatality.
• Compliance with Industry Standards and Regulations
  • The automotive and transportation industries are subject to a multitude of strict fire safety regulations and standards. The Vertical And Horizontal Flame Test Chamber is designed to meet and exceed these requirements, enabling manufacturers to ensure compliance with international and national standards such as FMVSS (Federal Motor Vehicle Safety Standards) in the United States, ECE (Economic Commission for Europe) regulations, and various industry-specific standards. By using this test chamber, companies can demonstrate the fire safety of their products and gain a competitive edge in the market.
  • For example, in the production of automotive wiring harnesses, compliance with flame-retardant standards is essential to prevent electrical fires. The test chamber allows manufacturers to test different wire insulation materials and ensure that they meet the required flame resistance levels.
• Research and Development Support
  • The test chamber is not only a tool for quality control and compliance but also a valuable asset for research and development in the automotive and transportation sectors. It allows material scientists and engineers to study the fire behavior of new and innovative materials, such as lightweight composites and bio-based polymers, and develop strategies to improve their fire resistance.
  • For instance, in the development of new fuel-efficient vehicles, the use of lightweight materials is increasing. However, these materials must also meet strict fire safety requirements. The test chamber enables researchers to evaluate the fire performance of these materials and develop flame-retardant treatments or modifications to enhance their safety characteristics.

4. Production and Quality Assurance

• Rigorous Manufacturing Process
  • The Vertical And Horizontal Flame Test Chamber is manufactured in a highly controlled environment, following strict quality management systems. Each component is carefully sourced and inspected for quality and performance. The assembly process is carried out by trained technicians using advanced manufacturing techniques to ensure the proper alignment and functionality of all parts.
  • The calibration of the burners, sensors, and measurement systems is a critical step in the manufacturing process. It is performed using traceable reference standards to guarantee the accuracy and reproducibility of the test results. Regular quality audits and inspections are conducted to maintain the highest level of product quality.
• Quality Certification and Validation
  Our test chamber has obtained relevant quality certifications and has been validated by independent testing laboratories. It has been proven to provide accurate and reliable test results, conforming to the most demanding automotive and transportation industry standards. We also continuously update and improve our product based on the latest technological advancements and customer feedback to ensure its long-term performance and compliance.

5. Application Areas and Success Stories

• Automotive Interior and Exterior Components
  • In the automotive industry, the test chamber is widely used to evaluate the fire performance of interior components such as seats, carpets, headliners, and dashboard trim. A major automotive manufacturer used the chamber to test a new type of seat fabric. The test results showed that the fabric had excellent flame resistance, with a low flame spread rate and short afterflame time. This allowed the company to use the fabric in their luxury vehicle models, enhancing passenger safety and comfort while meeting strict fire safety regulations.
  • For exterior components, such as bumpers and body panels made from plastic composites, the test chamber helps in assessing their fire resistance in case of a vehicle fire. A leading automotive parts supplier used the chamber to develop a new flame-retardant plastic composite for bumpers. The test results enabled them to optimize the material formulation and manufacturing process, resulting in a product that met the required fire safety standards and had improved durability and impact resistance.
• Transportation Infrastructure and Safety Equipment
  • In the transportation infrastructure sector, the test chamber is used to evaluate the fire performance of materials used in tunnels, bridges, and railway stations. For example, the fire resistance of fireproof coatings and insulation materials used in tunnels is crucial for ensuring the safety of motorists and preventing the spread of fire in case of an accident. A construction company used the chamber to test different fireproof coating materials and select the most suitable one for a major tunnel project.
  • In the area of transportation safety equipment, such as fire extinguishers and emergency lighting systems, the test chamber is used to evaluate the fire resistance of the housings and components. A safety equipment manufacturer used the chamber to test a new design of fire extinguisher housing. The test results helped them to improve the design and ensure that the housing could withstand high temperatures and flames, thereby enhancing the reliability and safety of the product.
• Aerospace and Maritime Applications
  • Although primarily designed for automotive and transportation, the test chamber also finds applications in the aerospace and maritime industries. In aerospace, it is used to evaluate the fire resistance of cabin materials, wiring, and avionics components. A leading aerospace company used the chamber to test a new type of cabin upholstery material. The test results showed that the material met the strict fire safety requirements of the aerospace industry, allowing the company to use it in their commercial aircraft, improving passenger safety and comfort.
  • In the maritime industry, the test chamber is used to assess the fire performance of materials used in ship interiors, such as bulkheads, decks, and furniture. A shipbuilding company used the chamber to test a new type of decking material. The test results enabled them to select a material that had good fire resistance and met the international maritime safety regulations, ensuring the safety of the crew and passengers on board.

6. Service and Support

• Pre-Sales Technical Consultation
  Our team of experts provides in-depth technical consultations to help customers understand the capabilities and suitability of the Vertical And Horizontal Flame Test Chamber for their specific testing needs. We offer demonstrations and training to familiarize customers with the operation and functionality of the equipment before purchase. We also assist in selecting the appropriate test methods and accessories based on the materials and applications to be tested.
• After-Sales Service and Maintenance
  We offer comprehensive after-sales service, including on-site installation and commissioning. Our technicians are available for regular maintenance, calibration, and emergency repairs. We provide spare parts and upgrades to keep the test chamber operating at peak performance. We also offer service contracts that include preventive maintenance and priority technical support, ensuring the long-term reliability and availability of the equipment.
• Training and Technical Support
  We conduct training programs for new users to ensure they can effectively operate the test chamber and interpret the test results. Our technical support team is available 24/7 to answer questions, provide troubleshooting assistance, and offer guidance on test method optimization and compliance with relevant standards. We also provide software updates and support for the data acquisition and analysis systems, enabling customers to take full advantage of the latest features and technologies.