DGBELL -70~150℃ Temperature Range Rapid Temperature Change Rate Test Chamber
Temperature is the inevitable stress that every product of materials experiences at the testing stage after development. How the product or material reacts to the effect of stress might differ from each other. When people purchase electronics they use them differently, while some may use the electronic products as recommended by the manufacturer others will typically abuse them. This is why each manufactured product needs to undergo temperature qualifications, life testing, and other additional evaluation before officially introducing it in the marketplace.
Applications
This equipment is widely applied to electronic and electric products, components and materials by constant high low temperature, temperature change, cycling, damp heat, etc environment simulation reliability test.
Features
With high precision perfect external design, external with double sides cold rolled plate electrostatic powder coated material, internal with SUS#304 high temperature resistant stainless steel. Insulation material adopts fire resistant high strength PU polyurethane foaming thermal insulating material. More than 20% energy saving is achieved & thanks to the introduction of Japan & German advanced refrigerator control technology. Control systems and control circuit components are introduced with the famous brand.
Standard Compliance
GB/T5170.2-2008 Inspection methods for environmental testing equipment for electric and electronic products-Temperature testing equipment
IEC60068-2-1:2007 (GB/T2423.1-2008) Environmental testing - Part 2: Test methods - Tests A: Cold
IEC60068-2-2:2007 (GB/T2423.2-2008) Environmental testing for electric and electronic products Test methods - Tests B: Dry Heat
GB/T2423.22 Environmental testing for electric and electronic products-Part 2:Test methods-Test N: Change of temperature
IEC 60068-2-14 2009 Environmental testing -- Part 2-14: Tests -- Test N: Change of temperature
GB/T5170.2-2008 Inspection methods for environmental testing equipment for electric and electronic products-Temperature testing equipment
Performance parameters
Model |
BTKS-150 |
BTKS-225 |
BTKS-408 |
BTKS-800 |
BTKS-1000 |
Test Space W x H x D (mm) |
500x600x500 |
500x750x600 |
600x850x800 |
1000x1000x800 |
1000x1000x1000 |
External Dimension W x H x D (mm) |
700x1700x1370 |
700x1750x1420 |
650x1650x1270 |
1200x1900x1620 |
1200x1900x1820 |
Temperature Range |
-70~150℃ |
||||
Temperature Fluctuation |
±0.5℃ |
||||
Temperature Deviation |
≤2.0℃ |
||||
Temperature Uniformity |
≤±2.0℃ |
||||
Heating Rate |
From -40℃ to 80℃,full range non-linear average about5℃/min(10℃/min or15℃/min can be customized) , no load. |
||||
Cooling Rate |
From 80℃to -40℃, full range non-linear average about5℃/min(10℃/min or15℃/min can be customized),no load |
||||
Temperature Overshoot |
≤±2℃ |
||||
Internal Material |
1.2mm thick SUS#304 high & low temperature resistance stainless steel. |
||||
External Material |
Adopt flame retardant high strength PU Polyurethane foam insulation material. |
||||
Control Method |
Touch screen programmable PLC, with USB interface, with RJ485 interface, can be connected to computer controlling, special network control software, convenient remote monitoring, data acquisition. |
||||
Compressor |
Tecumseh (France)-fully air-cooled double-fall cooling compressor. Or Bock (Germany) semi-enclosed air-cooled refrigeration. |
||||
Safety Protection |
Explosion-proof pressure relief device, explosion-proof chain, mobile phone alarm device, networking, smoke exhaust device, fire extinguishing device, etc. |