MachineU > China Products > Chemicals > Polymer
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
Specifications
Brand Name :
Aorun
Model Number :
Aorun 312
Place of Origin :
China
MOQ :
450KG
Price :
Negotiable
Payment Terms :
L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Supply Ability :
100000kg per month
Delivery Time :
5-8 work days
Packaging Details :
220kg drum
CAS No. :
38891-59-7
MF :
Resin Hardener
Mixing Ratio :
5：1
Viscosity :
500-1000cps（adjustable）
Cure Condition :
25 degree
Shelf life :
12monthes
Appearance :
Crystal Clear Colorless
Curing time :
24hrs
Work Time :
30-45mins
temperature resistant :
-60-120
Packing :
Accept OEM
Recommended thickness :
1-2mm
Description

Crystal Clear Art Resin Coating 100% Solid Two Component Anti UV Epoxy Resin Casting for Bar Tops Tabletops Countertop

Quick Detail:

Name Epoxy floor 312 Application
concrete floor, cement floor, countertops
Type BPA Function 100% Waterproof
Eco-friendly, self leveling, fast cure
Description:
1. Epoxy resin 312 is a clear epoxy resin that cures under normal and low temperature conditions.
2. It has good leveling, natural defoaming, low viscosity, high hardness and high strength.
3. It can be cured at room temperature or by heating. Dedicated to crystal drop board, marble board, 3D floor insulation, metal floor, kitchen countertop, resin coating, high hardness coating on any surface; and other electronic parts, moisture-proof potting, secret masking, etc.
4. normal conditions can be reach a 5-7years anti yellow.
5. The maximum thickness of one potting can reach 5-7cm.
Specification:
Items
Units/conditions
Technical Data
Viscosity
Shore-D
80-85
Volume resistivity
25℃/ Ω./ cm
4.3x1015
Surface resistivity
25℃/ Ω.
2.6x1014
Dielectric strength
25℃ KV/MM
25
Coefficient of linear expansion
CM/K
<6.1x10-5
Glass transition temperature
℃
>90
Temperature resistant
℃
-60~120

The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
Tips:
1. If it is used to contact food after curing, the temperature of the food should not exceed 50 degrees Celsius.

2. When the hardness is higher than 82D (Shaw hardness), it can be directly polished.

3. The mixing quantity should not exceed 5kg, and the casting thickness should not exceed 3cm each layer.

4. When the temperature is higher than 25 degrees Celsius, it will cure faster, please reduce the number of mixing/casting by half, or it will be hardened in the container;

5. Curing time will be depend on room temperature and casting thickness , the room temperature higher it is, the faster curing it does. The thinner it cast the longer curing time it needs;

Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation

Product tags

resin for floor

,

epoxy coating for floor

,

pvc floor protector
Send your message to this supplier
Send Now

CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation

Ask Latest Price
Product Detail
Brand Name :
Aorun
Model Number :
Aorun 312
Place of Origin :
China
MOQ :
450KG
Price :
Negotiable
Payment Terms :
L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Contact Supplier
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation
CAS 38891-59-7 Epoxy Floor Resin 1mm-2mm For Anti Dust Concrete Floor Insulation

Chongqing Aorun Industrial Co., Ltd.

Active Member
4 Years
chongqing, chongqing
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Seller
Main Products :
Car Brake Pads, Electronic Control Unit, Car Spark Plug
Total Annual :
5000000-10000000
Employee Number :
100~150
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Car Shock Absorber
MachineU China Products Chemicals Polymer
Contact Supplier
Submit Requirement