Customized Lab Grey Epoxy Resin Marine Worktop Double Sink
1. Product introduction
Size:Custom-made worktop
Thickness:19/25 mm
Mini order : 50 sqm
2. Properties of Epoxy Resin Worktop
A) 24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
B) And laboratory common high temperature 600 degrees, not foaming, not broken, especially suitable for a long time to place the combustion furnace ventilation cabinet.
C). Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb moisture in the air, the installation will not warp deformation, especially suitable for the operation of splash zone.
D). Pollution resistance
Surface is smooth, no stoma, not to hide the dirt, effectively restrain bacterial growth, such as the SARS virus, etc.,especially suitable for the medicine and biological laboratories.
E). Durable
One core, not to take off layer, not inflation, not cracked,surface scratches can be repaired after renovation
F). Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive, do not produce poisonous gas when heated, will not violate the safety and health of operator.
G). High performance to price ratio
Unique 19mm thickness, the market is the highest price of the laboratory table system.
H). Beautiful appearance
Smooth surface (MATT finish) , light reflection, easy to clean, easy maintenance.
I). Uniform color
Ensure the color of different batches of products is permanent, can be used for multi color selection.
3. Common specification sheet (Unit : mm)
Long
|
Wide | Thickness |
1200 | 700(750) | 16/19/25 |
1500 | 700(750) | 16/19/25 |
1800 | 700(750) | 16/19/25 |
2400 | 700(750) | 16/19/25 |
3000 | 700(750) | 16/19/25 |
3600 | 700(750) | 16/19/25 |
4200 | 700(750) | 16/19/25 |
4. Physical Test Results
No. | Test Item | Test Method | Result |
1 | Deflection Temperature Under Load | ASTM D648-07 | 262℃ |
Method B | |||
2 | Density | ASTM D792-13 | 133.8lb/ft3 |
Method B | |||
3 | Flexural Strength | ASTM D790-10 | 12200psi |
Flexural Modulus | Method A | 2350000psi | |
4 | Rockwell Hardness | ASTM D785-08 | HRM98.3 |
Procudure A | |||
5 | Water Absorption | ASTM D750-98(2010)e1 | 0.03% |
6 | High Temperature Resistance Test | _ | No bubbles,rupture,deformation on the surface |
7 | Fire Resistatnce Test | _ | No bubbles,rupture,crack on the surface |