Decorative Flakes Full Broadcast Polyaspartic Floor Coating Sealer
Product Descriptions:
Product Name
|
Polyaspartic Sealer |
Drying time (25℃)
|
Touch dry≤2 hours / Hard dry≤12 hours
|
Viscosity (25℃), cps
|
Part A 200, Part B 250
|
Solid Content, %
|
100
|
Hardness, shore D
|
≥50
|
Coverage (advise 2 coats)
|
0.3kg/sqm per coat
|
Quick Details:
Excellent corrosion protection
Corrosion can destroy not only your equipment but also your budget. Polyaspartic coatings provide excellent protection against corrosion in construction, agricultural, and commercial vehicles and wind power stations, wind turbines, and other machinery exposed to weather conditions.
Features:
1. Fast cure times with excellent adhesion
2. Low Odor, No VOC
3. Superior chemical resistance
4. Superior abrasion resistance
5. Nonyellowing and good gloss retention
6. Easy to mix 1:1 ratio by volume
Advantages:
The cross linking of the Polyaspartic series film in the cure makes it exceptionally tough and durable, making it four times more abrasion resistant than normal epoxy. The chemistry is based upon polyaspartic and much attention has been given to the application and installation attributes in its formulation. As a result, the Polyaspartic clear topcoat is extremely user friendly without having sacrificed the performance of the finished floor coating product. The applications for this product are almost limitless. Polyaspartic is suited for use on high-end residential flooring applications, retail floor settings with high traffic, or food service floor areas where stain resistance and cleanability are paramount.