MPP Power Cable Protection Pipe with Electricity Construction

1. MPP power pipe
Definition: MPP power pipe is also called(MPP power cable protection pipe, MPP cable protection pipe), it is divided into the open type and the trenchless type. Using modified polypropylene as the main raw material, we do not need to dig a lot of mud, soil and destroy the road surface, laying pipelines and cables in special areas such as roads, railways, buildings and riverbeds. Compared with the traditional "tunneling and buriding method", the trenchless power pipe project is more suited to the current environmental protection requirements, removing the dust and traffic obstruction caused by traditional construction. The technique also allows the laying of pipelines in areas where excavation can not be carried out, such as historic sites, downtown areas, crop and farmland reserves, highways and rivers.

2. Classification: 110mm to 250mm, divided into general and reinforced types.
(1) The common type is suitable for excavation and construction without excavation through the depth of burial less than 4M;
(2) Reinforced type is suitable for engineering with a depth of burial greater than 4M without excavation.
Scope of application:
(1) MPP power pipe can be widely used in municipal, telecommunications, electricity, gas, tap water, heat and other pipeline projects.
(2) Directional drilling of MPP power pipe at urban and rural level without excavation, and excavation of power pipe.
(3) PMP electric power pipe urban and rural trenchless level directed drilling sewage discharge pipe project. Industrial effluents project.

Advantages of MPP power pipe:
The MPP electric pipe has excellent electrical insulation.
The MPP power pipe has high thermal deformation temperature and low temperature impact performance.
The tensile and compressive performance of MPP power pipe is higher than HDPE.

4, MPP power pipe light, smooth, small friction main force, heat welding butt.

5, MPP power pipe long-term use temperature 1 5 ~ 70 ℃.

Points to note for MPP tube construction:

(1) During the transportation and construction of MPP electric pipe materials, it is strictly forbidden to throw, crash, carve and expose arbitrarily.
(2) When the MPP power pipe hot melt docking, the two axes should be aligned, and the end surface cutting should be perpendicular and flat.
(3) MPP electric power pipe processing temperature, time, pressure, depending on climate conditions to make corresponding adjustments.
(4) The minimum bending radius of MPP electric pipe shall be not less than 75 tube diameter.