Good level of chemical resistance Laboratory Furniture worktop
Description:
EPOXY RESIN
Worktop with very good level of chemical resistance, recommended for moisture and wet areas, high temperature load areas, areas with stress on chemical load. Not suitable for hydrofluoric acid.
Advantages:
The whole board has same material, and it can be repaired as original when it is damaged.
Long life and stable, long-lasting quality, and price has an absolute advantage.
Specification:
Chemical Test Results for Black | ||
No. | Chemical Reagent | Actual Rating |
1 | Acetate,Amyl | 1 |
2 | Acetate,Ethyl | 1 |
3 | Acetic Acid,98% | 1 |
4 | Acetone | 1 |
5 | Acid Dichromate,5% | 0 |
6 | Alcohol,Butyl | 0 |
7 | Alcohol,Ethyl | 0 |
8 | Alcohol,Methyl | 1 |
9 | Ammonium Hydroxide,28% | 0 |
10 | Benzene | 0 |
11 | Carbon Tetrachoride | 1 |
12 | Chloroform | 1 |
13 | Chromic Acid,60% | 1 |
14 | Cresol | 0 |
15 | Dichlor Acetic Acid | 0 |
16 | Dimethylformanide | 0 |
17 | Dioxane | 0 |
18 | Ethyl Ether | 0 |
19 | Formaldehyde,37% | 0 |
20 | Formic Aicd,90% | 0 |
21 | Furfural | 0 |
22 | Gasoline | 0 |
23 | Hydrofluoric Acid,37% | 1 |
24 | Hydrofluoric Acid,48% | 3 |
25 | Hydrogen Peroxide,30% | 0 |
26 | Lodine,Tincture of | 0 |
27 | Methyl Ethyl Ketone | 0 |
28 | Methylene Chloride | 1 |
29 | Mono Chlorobenzene | 1 |
30 | Naphthalene | 0 |
31 | Nitric Acid,20% | 0 |
32 | Nitric Acid,30% | 0 |
33 | Nitric Acid,70% | 0 |
34 | Phenol,90% | 0 |
35 | Phosphoric Acid,85% | 0 |
36 | Silver Nitrate,Saturated | 0 |
37 | Sodium Hydroxide,10% | 0 |
38 | Sodium Hydroxide,20% | 0 |
39 | Sodium Hydroxide,40% | 0 |
40 | Sodium Hydroxide,Flake | 0 |
41 | Sodium Sulfide,Saturated | 0 |
42 | Sulfuric Acid,33% | 0 |
43 | Sulfuric Acid,77% | 0 |
44 | Sulfuric Acid,96% | 3 |
45 | Sulfuric Acid,77% and Nitric Acid 70%, equal parts | 0 |
46 | Toluene | 0 |
47 | Trichloroethylene | 1 |
48 | Xylene | 0 |
49 | Zinc Chloride, Saturated | 0 |
Rating scale: | Level 0--No detectable change | |
Level 1--Slight change in color or gloss | ||
Level 2-- Slight surface ething or severe staining | ||
Level 3--Pitting,cratering,swelling, or erosion of coating.Obvious and significant deterioration | ||
Acceptance level: | Laboratory grade finishes shall result in no more than four level 3 conditions. Suitability for a given application is dependent upon the chemicals used in a given laboratory |
Enough Stock:
Thanks for visiting, more information please contact with us.