Advantages :
1. Safety: After SGS tested, ONUS products have no formaldehyde or any of noxious materials, it is safety for the user.
2. Heat Resistance : ONUS’s worktop can resist 262℃ , it won’t foam and crack, the fire can extinguish because it has no any of paper materials.
3. Mositure Resistance : Due to our products are monolithic, it won’t swell and distortion on the mositure area.
4. Reagents Resistance : ONUS’s product can resist many of chemical reagents, it won’t been corrode by the most of chemicals.
5. Durability : ONUS products are monolithic and non-porous, it cannot delaminate or swell
6. Molded : The molded marine edge is easy to clean and install for user, due to the smoothly and non-porous surface, it won’t hidden bacteria and guarantee the worktops have long life.
7. Repairability : All of our products are monolithic epoxy resin, if there are some scratches on the surface, it can repaired with the sand paper polishing.
Specification:
Physical Test :

1. Compressive Test : 24000psi
2. Deflection Temperature Under Load : 262℃
3. Density : 133.8lb/ft3
4. Flexural Strength : 12200psi
5. Flexural Modulus : 2350000psi
6. Rockwell Hardness : HRM98.3
7. Water Absorption : 0.031%
8. High Temperature Resistance Test : No bubbles, rupture, deformation on the surface
9. Fire Resistance Test : No bubbles, rupture, crack on the surface

   Chemical Test Results for Black
   No.	Chemical Reagent	Neglectable Rating	Actual Rating
   1	Acetate,Amyl	1	1
   2	Acetate,Ethyl	1	1
   3	Acetic Acid,98%	1	1
   4	Acetone	1	1
   5	Acid Dichromate,5%	0	0
   6	Alcohol,Butyl	0	0
   7	Alcohol,Ethyl	1	0
   8	Alcohol,Methyl	1	1
   9	Ammonium Hydroxide,28%	0	0
   10	Benzene	0	0
   11	Carbon Tetrachoride	0	1
   12	Chloroform	1	1
   13	Chromic Acid,60%	2	1
   14	Cresol	0	0
   15	Dichlor Acetic Acid	0	0
   16	Dimethylformanide	2	0
   17	Dioxane	0	0
   18	Ethyl Ether	0	0
   19	Formaldehyde,37%	1	0
   20	Formic Aicd,90%	2	0
   21	Furfural	0	0
   22	Gasoline	0	0
   23	Hydrofluoric Acid,37%	2	1
   24	Hydrofluoric Acid,48%	2	3
   25	Hydrogen Peroxide,30%	2	0
   26	Lodine,Tincture of	2	0
   27	Methyl Ethyl Ketone	1	0
   28	Methylene Chloride	1	1
   29	Mono Chlorobenzene	1	1
   30	Naphthalene	0	0
   31	Nitric Acid,20%	3	0
   32	Nitric Acid,30%	3	0
   33	Nitric Acid,70%	3	0
   34	Phenol,90%	1	0
   35	Phosphoric Acid,85%	2	0
   36	Silver Nitrate,Saturated	1	0
   37	Sodium Hydroxide,10%	1	0
   38	Sodium Hydroxide,20%	1	0
   39	Sodium Hydroxide,40%	2	0
   40	Sodium Hydroxide,Flake	2	0
   41	Sodium Sulfide,Saturated	0	0
   42	Sulfuric Acid,33%	2	0
   43	Sulfuric Acid,77%	2	0
   44	Sulfuric Acid,96%	2	3
   45	Sulfuric Acid,77% and Nitric Acid 70%, equal parts	2	0
   46	Toluene	0	0
   47	Trichloroethylene	1	1
   48	Xylene	0	0
   49	Zinc Chloride, Saturated	0	0
   Rating scale:	Level 0--No detectable change
   	Level 1--Slight change in color or gloss
   	Level 2-- Slight surface ething or severe staining
   	Level 3--Pitting,cratering,swelling, or erosion of coating.Obvious and significant deterioration
   Acceptance level:	Laboratory grade finishes shall result in no more than four level 3 conditions. Suitability for a given application is dependent upon the chemicals used in a given laboratory

   Application:
   Epoxy resin worktops are use in all kinds of laboratories. In view of the rigid request for laboratory, epoxy resin worktops are vey popular in laboratory industry, it is the best choice for lab staff. The laboratory include the following:

10. R&D
11. University
12. Government
13. Medical
14. Enterprise