Short Description:

*Our Advantage, We can Produce Large Rubber Products, So, If your drawing is big enough, Just contact me*

E-Purchasing Rubber Mats Kitchen Mat Anti-Slip Grease-Proof Chef Mats - 3/8 In X 3 Ft X 5 Ft With A Beveled Edge - Black

Rubber mats for Anti Slip and Drainage Cover - Product features:

• Material: Rubber
• Measures: 914*1524*12mm
• Thickness: 12mm
• Sprayed PU surface, soft and comfortable to touch.
• Shock absorption – the rubber stud profile on the underside absorbs shock, reducing stress on joints and tendons.
• Low maintenance – easy to clean and wash.
• Easy installation - No glue or fixings required.
• Hard-wearing solid rubber mats.
• It can be turned over when the top surface wears.
• Built-in iron plate, super strong load-bearing

1. DRAIN MAT:

Large perforated holes allow liquid and waste to pass through quickly and keep wet areas clean & dry. Perfect for a poolside, outdoor shower, hot tub deck, under the sink, etc.

2. NON-SLIP FLOOR MAT:

Water and grease-resistant rubber material reduces the amount of slippery liquids or oils left on the floor and prevents slipping. Anti-slip safety mats are suitable for kitchens, restaurants, bars, and other high-traffic areas.

3. EASY TO CLEAN:

Just take them out and rinse them with the hose. Ideal for outside use, like the commercial entryway or home doorway front door. As a doormat, it cleans off dirt, debris, and liquid.

4. HEAVY DUTY:

Made of high-grade Natural and recycled Rubber, it’s sturdy, durable and lasts long. Lays flat and provides anti-fatigue support. Works great for utility areas like garage, basement, workshop, workbench, etc.

5. FLEXIBLE AND MULTI-USE:

Also works for concrete patios, front porches, gardens, home gyms, laundry rooms, dog kennels, decking, boats, spas, saunas, offices, warehouses, auto body shops, etc. Measuring at 23.6'' x 35.4''/ 2x3 feet; can be cut into any smaller size accordingly.

Specifications of Rubber Mat

1. TENSILE STRENGTH:≥13Mpa
2. BREAKING ELONGATION:≥ 300%
3.HARDNESS(SHORE A): 65 ±5 degrees (70 *C x 22h, COMPRESSIONRATE: 25 %)
4.ABRASION LOSS:≤1.0cm³ / 1.61km
5. BONDING STRENGTH BETWEEN RUBBER MAT AND METAL PLATE ≥5Mpa
6. ACID AND ALKALINE RESISTANCE: ≥ 70%
(20% CONCENTRATED SULFURIC ACID, 20% SODIUM HYDROXIDE, 24HOURS /
ROOM TEMPERATURE)
7.AGING WITH HoT AIR (70 °Cx .96h)TENSILE STRENGTH ≤ DECREASE 20%
BREAKING ELONGATION ≤ DECREASE 20% ,
HARDNESS (SHORE A): INCREASE OF 8 DEGREES MAXIMUM