Fabric ESD Wrist Strap Adjustable w/Aligator Clip Built In 1 Meg Ohm Resistor

Descriptions:

“ It is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body, which can result in electrostatic discharge.

It is used in the electronics industry by workers working on electronic devices which can be damaged by ESD, and also sometimes by people working around explosives, to prevent electric sparks which could set off an explosion.

It consists of an elastic band of fabric with fine conductive fibers woven into it, attached to a wire with a clip on the end to connect it to a ground conductor.

The fibers are made of carbon-filled rubber, and the strap is bound with a stainless steel plate.

They are usually used in conjunction with an antistatic mat on the workbench, or a special static-dissipating plastic laminate on the workbench surface.

The wrist strap is usually worn on the nondominant hand.It is connected to ground through a coiled retractable cable and 1 meg ohm resistor, which allows high-voltage charges to leak through but prevents a shock hazard when working with low-voltage parts ” from Wikipedia

Features:

- 360 degree curved wrist band and coil cord;

- The band is standard with 4mm or 10mm snap;

- The 2.05mm/2.5mm/3.0mm polyurethane coil insulation offers excellent coil memory;

- A swivel type banana jack increases coil life and prevents cord tangles;

- The soft woven fabric and curved buckle of the wrist band allows the skin to breathe and makes it very comfortable to wear.

- Meets or exceeds requirements of ANSI ESD standard

More Characteristics

More Photos

A, ESD PU Coil Cord /1.8m length / 2.05mm Dia./10mm Snap Wrist Strap

B, Pacakge would be 1pc/clip board or 1pc per opp bag

C, High Quality ESD PU Coil Cord /2.4m length / 2.5mm Dia./10mm Snap Wrist Strap

D, Package would be 1pc/opp bag

E, Many color bands available

F, Angled banana plugs available

G, ESD Rubber Mat Kits