ISO CE Certified Profession Manufacturer Economical LT-86A Scope Anti-static LED Magnifier Magnifying Lamp
Products Description:
This lamp has 30 high-quality SMD LEDs that illuminate your project with bright white light, and the 5 in., 3-Diopter / 5-Diopter lens magnifies 1.75 times / 2.25 times letting you see every detail.The energy-saving, environmentally-friendly LEDs are great for both your pocketbook or precision electronics components, and the adjustable arm gives you full control over your project.
magnifying lamp | |
Index: | LT-86A |
Light Power: | 10w |
Lens size: | φ127mm,magnifier 3×5×8×10×/15×/20x |
Lamp: | 30 pieces of LED |
Voltage: | 100-240V |
Resistance: | 10e5-10e9 Ω |
Electrostatic decay time: | 1000V / 100V less than 1.0s |
Holder Extension: | 1m |
Features:
1. Fully adjustable neck: the durable, slender arm has 3 hinges that pivot easily in any direction, bringing light exactly where you need it.It is economical and durable. It can greatly reduce the damage rate of electronic products in the production process, reduce the cost, and improve the product quality and profit;
2. Super bright reading and task lamp: this professional-quality LED magnifying lamp has a 5 in. Dia lens that is made of genuine Diopter glass.Main use: eliminate static electricity;
3. It matches 10w 30pcs of LED light, supply voltage 100-240V;
4, Its active arm is a special design,which can be adjusted conveniently and avoid magnifier's vibration interfere;
5, It matches with metal base and excellent spring mechanism, which brings more strong and rigid support;
6, White optical lens are available to relax the strain of eyesight after long time of use;
7, High-quality SMD LEDs: this lamp has 30 energy-saving SMD LEDs that are guaranteed to last, the low voltage saves your money on electricity and like most LEDs these SMDs give off almost no heat;
8, Powerful 5 in. lens: the powerful lens magnifies objects 1.75 times or 2.25 times or 3 times, bringing focus and clarity to reading, watching in lab or cleanroom.
Application:
It is widely used in dust-free workshop, purification workshop, photoelectric factory, led factory, PCB Factory, electronic factory, electronic equipment factory, wafer, LCD / LCM / LED, photoelectric optics, chip semiconductor, laser head, precision equipment, microelectronics industry, aerospace, military industry, electronic components (devices), photoelectric roducts, electronic devices, liquid crystal products, photoelectric integrated products, etc Aerospace manufacturing industry and other production fields that require ESD and purification level.
Installation Instructions:
1, Before using the product, please pay attention to whether the power supply voltage is consistent with the actual voltage.
2, When changing the direction and position of the magnifying glass, if the adjusting arm lock button is too tight, please relax alittle, and then adjust the position and direction before tightening. Never pull forcibly to avoid damaging the components.
3, After turning on the power switch, the lamp is first warmed up for about 1.5 seconds, and then the lamp is normally lit.
4, It is equipped with abnormal state protection. When an abnormal phenomenon occurs in the lamp (the lamp is open, the lamp does not start, and the lamp leaks), the electronic circuit is automatically shut down and locked until the power is turned off to eliminate the abnormal phenomenon.
5, When the lamp is off, check whether it is caused by aging after long-term use. If so, you need to change the lamp. If the lamp does not turn on after replacing the lamp, please check whether the lamp, the lamp plug and the power plug are connected properly.
LT-86AE ESD Antistatic Magnifier Lamp picture:
Other Products we Supply: