1.5 M 4 Twisted Pairs Ethernet Patch Cable Customized
Colors CCA Cat5e Patch Cable
Cat 5e UTP Patchcords
Category 5e Unshielded Twisted Pair (UTP) patchcords conform to Class D standards. Our patchcords are made to the highest standards using only quality stranded cable giving you the best in flexibility and top grade 50μ gold plated RJ45 connector plugs. This combination makes for outstanding performance and reduced degradation. All patchcords are produced with a injection moulded boot with an easy depression latch cover. Available across 8 colours, 6 standard lengths and in PVC or LSZH jacket varieties.
CONSTRUCTION & CHARACTERISTICS
Conductor | Material/Size | Solid CCA /24AWG |
Insulation | Material | HDPE |
Thickness | Nominal: 0.20 mm | |
Diameter | Nominal: 0.96 mm | |
Colors
| Blue/White-Blue Orange/White-Orange | |
Green/White-Green Brown/White/Brown | ||
Unaged Elongation | Min. 300% | |
Unaged Tensile Strength | Min. 1.683 Kgf/mm2 | |
Jacket
| Material | FRPVC, Low-Smoke |
Thickness | Nominal: 0.55 mm | |
Diameter | Nominal: 5.4±0.2 mm | |
Color
| Assorted upon request | |
Unaged Elongation | Min. 125% | |
Unaged Tensile Strength | Min. 0.917 Kgf/mm2 | |
Aging @ 100°C for 168Hrs | Min. elongation retention:75% | |
Min. tensile strength retention: 70% | ||
Printing (custom marking is available) | CAT5E UTP 4PR 24AWG 350Mhz PLENUM CABLE VERIFIED TO ETL TIA/EIA-568B.2-1 FT (Sequential Foot Mark) |
Features
TIA/EIA-568B.2-1;ISO/IEO 11801;NEC/CEC
Fire protection – IEC60332-1 (CM)
Application: Horizontal communication cable; for indoor installation
Wiring Scheme
ANSI/TIA/EIA-568-C.2: T568A & T568B
ISO/IEC 11801: 8-position conductor/pair assignment (1-2/3-6/4-5/7-8)
Cordage
Construction: 4 pairs, 7 strandsed oxyge-free copper,24 AWG, UTP CAT.5e
Pair Identification: Pair1= Blue/White Pair2= Orange/White
Pair 3= Green/White Pair4= Brown/White
Outer Cable Diameter: 5.5mm ± 0.2 mm
Outer Jacket: PVC/LSZH Jacket
Plug
Type:Unshielded RJ45 8P8C Modular Plug
Housing: UL listed 94V-0/1/2 flame retardant polycarbonate
IDC blades: phosphor bronze, gold plating over 100 μin of nickel in contact area
MECHANICAL
Retention: 50 N (11 lbf) for 60±5 s Installation Temperature: 0°C to +60°C
Mating cycle life: min 750 cycles Operating temperature: -20°C to +60°C
Tensile strength: ≥ 20 N per wire Minimum bend radius: 4 outer cable diameters