Lug Type Aluminum Electrolytic Capacitor 300uF 360V for Photo Flash

Features:

Photo Flash capacitor is name by the types of usage scenarios. It belongs to snap-in electrolytic capacitor itself, because frequently applied to flash type products, in order to quickly distinguish called flash capacitors, because snap-in electrolytic capacitor also points a lot of kinds of use function with the scene, direct call flash capacitors, can quickly recognizing the need to what function.

Photo Flash capacitor's parameters are generally large capacity with high pressure and high frequency low resistance snap-in electrolytic capacitor, because the flash is a kind of need instant peak current pressure shining light, large capacity because of the need to quickly store electricity, in the use of moment with high voltage produced extremely fast, this is the most basic principle of flash, flash the general requirements of capacitance voltage for at least 300V can achieve the effect of flash, and for the sake of safety will generally set a good safety margin, so the general flashlight capacitor voltage parameter is 400V, and the capacity needs to be determined according to the use of what products.

Application:

camera, cell phone camera

hair removal device

Specifications:

Dimensions

Appearance

Unless customers’ special need, the below info should be marked clearly on caps’ body.

1. Brand: Topmay
2. Rated Voltage: 360V
3. Nominal Capacitance: 300uf (e.g.)
4. Polarity “-“mark on the Negative Sleeve Side .Pin with grid dots is Negative

Condition For storage /use

If electrolytic capacitors temperature caused by such things as direct sunlight, high temperature, the life of the Capacitor may be adversely affected .Storage in a high humidity atmosphere may affect the solderability of lead wires and terminals.

Storage area

Do not store capacitors at a high temperature and high humidity .Store the capacitors indoors at a

temperature of-10~+70 ℃ and a humidity of less than 75% RH

Store the capacitors in places free from water ,oil or salt water .

Store the capacitors in places free from toxic gasses (Hydrogen sulfide,sulrurous acid ,nitrous acid , chlorine ,ammonium ,etc .)

Store the capacitors in places out of Ozone , ultraviolet rays of radiation.