Specifications
Brand Name :
LINKIN
Type :
7.2 kw ac wallbox charger
Combination :
LED/LCD/ RFID/Emergency stop button, AC Charging Station
Rated current :
32A
Cable length :
5M/10M/15M
Connector type :
IEC 62196 / SAE J1772
Start Method :
"Plug and play" or RFID Card
Installation :
Wall-mounted
charging power :
3.5KW/7KW/11KW/22KW
Description

Wall Mounted Car EV Wall Box Home Charging Station For Electric Vehicle Car

Specification

All products must pass the following inspection before leaving the factory:


1. Function test:
A. charging function control test,
B. communication function test,
C. insulation detection function test,
D. vehicle plug locking function test,
E. pre-charging function test

2. Charging output test:
A. four ui large constant power output test,
B. power control test,
C. low-voltage auxiliary power test,
D. output current response time test,
E. transmission out current stopping rate test,
F. efficiency test,
G. power factor test.

Wall Mounted EV Charger Power Specification
EU Standard
Charging Connector Type
IEC 62196-2 (Type 2)
AC Power Input Rating
1 Phase
3 Phase
230V±15%
380V±15%
AC Power Output Rating
3.5kw/16A
11kw/16A
7kw/32A
22kw/32A
43kw/63A
Frequency Rating
50/60 Hz
User Interface & Control
Emergency Stop Button
Yes
Plug-and-Charging
Yes
RFID Card Charging
Yes
App Charging
Yes
Ethernet Interface
Yes
Wifi Function
Yes
OCPP Protocol
OCPP 1.6
4.3-inch LCD Screen
Optional
Protection
Over Voltage Protection
Yes
Under Voltage Protection
Yes
Over Load Protection
Yes
Short Circuit Protection
Yes
Earth Leakage Protection
Yes
Ground Protection
Yes
Over-temp Protection
Yes
Surge Protection
Yes
RCD
Type B
Environmental
Storage Temperature
-40 ~ 75℃
Operating Temperature
-30 ~ 55℃
Operating Humidity
Up tp 95%, non-condensing
Altitude
≤2000m
Cooling Method
Natural Cooling
M3P Wallbox Mechanical
IP Code
IP54
Dimension(H×W×D,mm)
410×260×164
Weight
12kg
Charging Cable Length
5m or Customize
Enclosure Material
Front-panel: Tempered Glass, Back-cover: Plate Metal
M3T Mounting Pole(Optional)
Dimension(H×W×D,mm)
1400×200×100
Weight
<8kg
Enclosure Material
Metal

3. control guide test:
A. charging control state test,
B. charging connection control timing test,
C. control guide voltage limit test,
D. communication interruption test,
E. protection grounding continuity loss test,
F. connection detection signal disconnection test,
G. battery voltage and communication message does not match the test,
H. battery voltage exceeds the charger range test,
I. draw battery two protection function vehicle zu high allowable total voltage mismatch test,
J. charging demand is greater than Battery parameters test.

Send your message to this supplier
Send Now

SAE J1772 IEC 62196 Wall Box EV Charger Electric Charging Point Home 15M Cable

Ask Latest Price
Brand Name :
LINKIN
Type :
7.2 kw ac wallbox charger
Combination :
LED/LCD/ RFID/Emergency stop button, AC Charging Station
Rated current :
32A
Cable length :
5M/10M/15M
Connector type :
IEC 62196 / SAE J1772
Contact Supplier
SAE J1772 IEC 62196 Wall Box EV Charger Electric Charging Point Home 15M Cable

JIANGYIN TOPSUN TECH CO., LTD

Active Member
4 Years
Business Type :
Manufacturer, Seller
Employee Number :
>100
Certification Level :
Active Member
Contact Supplier
Submit Requirement