CCS 1 Combo 1 To CCS 2 Combo 2 EV Charging Plug Converter Adapter
Attention to know
EV chargers are splash, water and dust resistant and have been tested under strictly controlled laboratory
conditions to achieve an IP65 rating in accordance with IEC standard 62196. However, the resistance to splashes, water and dust is not permanent and may weaken over time under normal use. Damage caused by liquids is not covered by the warranty.
To prevent damage to your charger from liquids, please avoid the following situations :
1. Exposing the charger to pressurised water or high velocity water flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing directly on the charging connector may help to speed up the drying process.
Do not use an external heat source to dry the charger, or insert foreign objects such as cotton swabs or paper towels into the charging port.
Type | EV Charging Connector | The main material | Thermo Plastic/Silicon Rubber/Copper Alloy |
Plug color | Black/White/Color | Patch life | ≥10000 |
Rated Current | 32A | Fire rating | UL94 V-0 |
Rated Voltage | 220-250V | Waterproof rating | IP54 |
Resistance Voltage | 2000v | Operating temperature | -30°C~+50°C |
Insulation resistance | >1000MΩ | Cable Specification | 3*6mm2+2*0.5mm2 |
Contact resistance | less than 0.5mΩ | Cable Length | 5M/Other |
Type 1/SAE J1772 to Type 2/IEC 62196-2 EV Charging Cable
Meet SAE J1772(Type 1 EV Plug) and IEC 62196-2 (Type 2 EV Plug)
Meet SAE J1772(Type 1 EV Connector) and IEC 62196-2 (Type 2 EV Plug)
EV Cable length: 3m, 5m, 10m or customized EV Portable Charger
Color of EV Charging Cord : Orange ,Green and Black.