200KW new emergency mobile charging system/new electric vehicle emergency charging system
Description
This product is a new mobile charging system with an integrated battery pack that can be installed on a trailer or a stand-alone truck to provide emergency charging services for electric vehicles. The system can charge different types of EVs on the road. Compared to gasoline or similar generators, this mobile charging system is pollution-free and completely green. The highlight of this system is that it can be recharged. The built-in battery can be charged via home or company's AC power or public electric vehicle charging systems on the road.
Product Feature
Application scenario
Technical Parameters
Charging module technical parameters | ||
Category | Project | Index |
Structural properties | Size(H×W×D) | 84mm×218mm×460mm(without packaging) |
weight | ≤13kg(without packaging) | |
Protection level | IP20 | |
Environmental characteristics | Working temperature | -35℃~+75℃ |
Relative humidity | 5%RH~95%RH(No condensation) | |
AC input characteristics | Input voltage | 260V AC~485V AC,Rating380V AC |
Voltage format | Three-phase four-wire system (3W+PE) | |
Frequency | 40Hz~70Hz,Rating50Hz/60Hz | |
Input current | ≤38A | |
Power factor | ≥0.99 (load ≥30%) | |
THD | ≤5% (load ≥50%) | |
DC input characteristics | Input voltage | 358~800VDC |
Rated input | 650~770VDC | |
Output characteristics | Output voltage | 50~1000VDC |
Rated output current | 67A | |
Rated output power | 20KW | |
Output constant power range | 300~1000V | |
Soft start time | 3s~8s | |
Output current limit range | 0.5~120A | |
Sleep function | have | |
Standby power consumption | ≤10W@380Vac | |
Hot swap | support | |
Full load efficiency | ≥95% | |
Communication bus protocol | CAN | |
Protection characteristics | Input undervoltage protection | ≤260V AC (Line voltage) |
Input overvoltage protection | 487V AC~510V AC (Line voltage) | |
Output overvoltage protection | high pressure mode:1020V DC~1050V DC | |
Output is discharged and poured | support | |
Charging system technical parameters | ||
Output characteristics | Output voltage | 50~1000VDC |
Rated output current | 670A | |
Rated total output power | 200KW | |
Standby power consumption | ≤19W@380Vac |
Energy storage battery technical parameters
Battery system technical parameters | ||
Battery performance parameters | Rated energy | 256kWh |
Battery Type | Lithium Iron Phosphate | |
Rated voltage | 420V | |
voltage range | 370V~450V | |
Rated charge and discharge current | 200A (20~35℃, SOC:10~100%) | |
Discharge cut-off current | 365V | |
Charge cut-off current | 460V | |
Cycle life | >10000Second-rate | |
Environmental characteristics | Working temperature | -5~+55℃ |
Working humidity | 5%~95%relative humidity | |
Communication function | Communication method | CAN bus/RS485 |
Structural properties | size | 47.8mm×173.9mm×132.7mm |
weight | ≤2.3kg | |
Protection characteristics | Protect | Overcharge protection, over-discharge protection |
About us
Mckee is a manufacturer focusing on electric car charging stations and related electric car accessories. Committed to sustainable development since 2011, we constantly aim to adopt clean and green technologies,strive to provide safe and green energy services for human beings through technological innovation.
We provides you with a complete electric vehicle charging solution, from innovative energy storage technology, to public DC fast charging stations, to fast charging stations and portable charging stations for home use. We deploy infrastructure can meet every type of demand. We want to spread our footprints all over the world, continuously make new contributions to the new energy sector.
Our Main Products: 360KW Split DC EV Charging Station, 360KW Integrated DC EV Charging Station, 240/320KW Integrated DC EV Charging Station ,120/160KW Integrated DC EV Charging Station, 60/80kW DC EV Charging Station, 7KW/11KW/21KW AC EV Charging Station, 3.5KW/7KW Charging plug with American standard and European standard, Portable EV Charging and related accessories.
If you have any special needs, please contact our online service.
FAQ
Q: How long is your delivery time?
For charging posts, it is usually 3-10 days. If there is no stock, the production lead time is determined according to the order quantity. High-power DC charging posts usually need to be customized according to the customer's technical parameters.
Q: How long does it take to customize the prototype?
For charging piles, the prototype time is usually 7 days.
For DC charging post, the prototype time is usually 15 days.
For high power fast charging station, the technical parameters need to be determined before production, and the prototype time is usually 30 days.
Q: How to guarantee the service?
Our products are divided into two categories: household and commercial.
For home chargers, we provide standardized service: 1 year warranty + remote installation and usage guidance + video installation tutorial
For commercial chargers, we not only provide standardized services for charging piles, but also provide payment software docking services for operating companies.
Q: How do you guarantee the quality of your products?
The charging post products we sell have passed GB certification in China and CE certification in EU. For some other countries, the relevant certifications are in progress.
Q: How do you guarantee the quality of your products?
The charging post products we sell have passed GB certification in China and CE certification in EU. For some other countries, the relevant certifications are in progress.
NOTE:
1- OEM supported.
2- Any requirement please contact us to talk about the details.
3- We will reply you for your inquiry in 24 hours.
4- If you have any questions about the charger, please contact us.
5- The above for reference only, final price decide by the charger KW, please contact us to get the correct quote.