16800 MAh 600A Peak Current Portable Car Jump Starter Battery

Main Features

1. Adopted the pure LiCo02 as the key material .
2. Insured for with PICC for our for global service .
3. Acquire CE , FCC , RoHS , MSDS , UN38.3 and so on certifications .
4. Used synchronous rectification technology , higher efficiency to use USB output .
5. Wide design temperature (-40 degrees to 85 degrees) three times starting in the cold weather.
6. Temperature protection , USB output make things more easy .
7. Intelligent multiple protection system: the overcharge protection ; short-circuit protection ; temperature protection ; over-voltage protection ; over-discharge protection ; over-flow protection ; converse connection protection .
8. Applied to all the smart phones , MP3/4/5 , PSP,Tablet PC ,iPad ,and the other digital products with 5 Volts .

Specifications:

Product Features:

1. It is Car jump starter and an Air Pump/Compressor 2 in 1 .

2. It can start cars : 12V vehicles (Gasoline vehicle , displacement <3.0L ; diesel vehicle , displacement <2.8L)

3. Its Air pump displacement > 30 liter per minute .
4. Short-circuit-proof Design : even cliping the Positive and Negative clamps together , it will not cause short circuit , which protect the users better .
5. Multi-functon LED lights : torch/sos/strobe
6. Integrated Design , Small Size and portable .
7. Double 12V Input as Home Charger and Car Charger .

11. Recycling Life Time : 3000 Times !

Package included:

1 x Integrated Jump Starter (with air compressor inside )
1 x Car Charger
1 x Home Charger ( US/EU/UK Plug available )
1 x 4 in 1 Mobile Phone connector

8 x Laptop Charging adaptors

1 x Jump starter cable with battery clamps

1 x Air Pump Cable

3 x Air Pump Heads

1 x User manual
1 x Tool box

How to use mini jump starter to start your car?

1. Connect Red(+) clamp of jump starter to Red(+) positive terminal of vehicle, then connect Black (-) clamp of jump starter to Black (-)negative terminal of vehicle .
2. When the screen turn to"JUMP START READY"it can jump start car .
3. If the capacitor is power off , it can charging by the car battery or press boost to charging from back-up battery .
When the screen turn to "JUMP START READY" , it can jump start the car .
4. Once vehicle is started remove Black(-) clamp from vehicle and then Red(+) clamp from vehicle . Leave vehicle running .

Warnings:
1. Do make the blue plug into the jump starter socket tightly when jump start the vehicle. If not, it can't jump start the vehicle, and even make the joint melt.
2. Do check whether the battery clamps well connected; battery connector rusted, dirty if the vehicle can not be started. Jump start again after cleaning. Do not continue to jump start if 3 times no successfully. If not, it will damage the product. Do check the vehicle for other reasons.
3. Do remove the product from the vehicle within 30s after the vehicle started. If not, it may lead dangerous.
4. Do not connect the two clamps, if not, it may lead dangerous.
5. Do not decompose product. If not, it may lead dangerous.