MachineU > China Products > Electrical Equipment & Supplies > Electrical Instruments > Battery Testers
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
Specifications
Brand Name :
Sinuo
Model Number :
SN559-1
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Delivery Time :
30 days
Supply Ability :
30 sets/month
Packaging Details :
Plywood Case
Price :
Customized
Applied Standard :
UL2580, UL 1642, UL38.3 and etc.
Temperature Range :
-40～150℃
Temperature Uniformity :
≦±2.0℃
Temperature Fluctuation :
±1.0℃
Temperature Deviation :
≤±2℃ （No-load, constant state）
Heating Rate :
Average 1~3℃/min
Compressor Type :
France Tecumseh Compressor
Cooling Method :
Air-cooled
Description

UL2580 EV Lithium Battery Cell Thermal Cycling Testing Equipment

Complied Standards & Clauses

UL 2580 Batteries for Use In Electric Vehicles Annex B2.6 and Annex D3.8

IEC 62133-2012clause7.2.4

UL 1642,UN38.3

Equipment Overview

The heating and cooling system is mainly used for electric and electronic products, components and other materials' high low temperature test, temperature alternating, damp heat test, environment simulate reliability test, etc.

This test equipment adopts programmable high accuracy microcomputer controller, 7-inch TFT color LCD touch screen, and Intelligent software, which can achieve easy and humanized operation.

Technical Parameters

Volume & Dimension
Effective Volume 150L (can be customized)
Inner Dimension W500 mm*H600 mm*D500 mm (can be customized)
Overall Dimension

W700mm*H1750mm*D1570mm (can be customized)

Kindly remark: exact overall dimension pls refer to the final design drawing!
Performance
Condition

Air cooling type under environment temp.+5℃～+35℃, relative humidity≤85%.

No load (without specimen in the testing zone)
Temp. Range -40℃~+150℃
Temp. Fluctuation ±0.5℃
Temp. Deviation ≤±2.0℃
Temp. Uniformity ≤2.0℃
Temp. Heating Time From -40℃ to 80℃, full range non-linear average about 5℃/mins, no load
Temp. Cooling Time From 80℃to -40℃ , full range non-linear average about 5℃/mins, no load
Temp. Overshoot ≤±2℃
Max. Loading No
Humidity Range 20％RH～98％RH
Humidity Fluctuation ≤±2.5%RH
Humidity Deviation >75% RH: ≤+2, -3%RH, <75%RH:≤±5%RH
Constant Max. Heating Load

No

Temperature

Humidity Control

Diagraph

EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
Noise ≤70dB(A Level)
Structure & Material
External Chamber Adopt double electrostatic resin high temperature paint galvanized sheet.
Internal Chamber

Internal chamber with 1.2mm thick SUS#304 high &low temperature

resistance stainless steel. Bottom with 2mm thick #304 stainless

steel, with high strength square tube connection reinforcement , loading capacity with ≥250KG/㎡
Insulation Material Adopt flame retardant high strength PU Polyurethane foam insulation material with thickness of 100mm, heat preservation coefficient less than 0.0212kcal/Mohr.
Chamber Door Single open door, Door size: W500XH600mm.
Observation Window With vacuum glass observation window (W300 xH400mm) on the door; and door frame with electric heat resistant, anti-frosting, anti-condensing devices, ensures clear observation of the specimen under testing
Testing Hole One ￠50mm testing hole on left of the chamber, with silicon seal and stainless steel cover.
Sealing Adopt original imported silicon rubber strip, with high sealing performance
Sample Holder SUS#304 stainless steel sample holder, 2 layers, loading capacity: ＞50KG/layer.
Pressure Balance Port Installed mechanical pressure close type balance device to avoid pressure difference influence the test chamber strength when do high temp. high humidity test.
Lighting Inside Chamber With one Philip brand energy saving light (9W) inside the observation window

Product tags

battery load test procedure

,

battery condition tester

,

auto battery tester analyzer
Send your message to this supplier
Send Now

EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment

Ask Latest Price
Product Detail
Brand Name :
Sinuo
Model Number :
SN559-1
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Contact Supplier
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment
EV Lithium Ion Battery Testing Machine Cell Thermal Cycling Testing Equipment

Sinuo Testing Equipment Co. , Limited

Verified Supplier
4 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products EV Battery Testing Equipment
MachineU China Products Electrical Equipment & Supplies Electrical Instruments Battery Testers
Contact Supplier
Submit Requirement