1.2µs/50µs Impulse Dielectric Withstand EVSE Testing Equipment
Complied Standards & Clauses
IEC/CDV 61851-1 "Electric vehicle conductive charging system - Part 1: General requirements" clause 12.3
IEC 60664-1 "Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests"
IEC 61180 "High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment"
Equipments Overview
Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance.
Test sample: Household appliance, Audio, video and similar electronic apparatus.
Feature: This impulse voltage tester is a standard lightning wave test device with waveform 1.2/50µs. front time is 1.2µs, time to half value is 50µs, it is a destructive tester. The sample breakdown will produce a spark and acoustic, instrument peak voltage than the no-load voltage is decreased substantially (close to zero), when applying the same voltage in the next test, it will also show the above phenomenon.
Technical Parameters
Model | SN1104 |
DC high voltage | Max. 12.5kV |
Impulse voltage wave | Impulse wavefront time: 1.2 µs ± 30 %; Half value of after wave time: 50 µs ± 20 % (Note: the waveform can be checked by an external oscilloscope.) |
Instrument internal resistance | 12Ω± 10%, 40Ω± 10%, 500Ω± 10% three resistance built-in, can be switched by choosing different terminal |
Peak voltage: 300 V~ 12,500V | Low: 300V~2,500V High: 2,500 V~ 12,500V |
Impact interval time | 5 ~ 99s |
Impact cycles | 1 ~ 9999 |
Polarity | Positive and negative |
Working power source | Rated voltage: ~ 220V±10%, 50Hz |
Dimension | 630mm×600mm×380mm |
Weight | 30 KG |
Questions & Answers
Q: Can the impulse waveform be checked directly on this apparatus?