Specifications
Brand Name :
Sinuo
Model Number :
SN1013
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Delivery Time :
15 days
Price :
Customized
Supply Ability :
30 Sets / Month
Packaging Details :
Plywood Case
Applied Standard :
IEC 62196-1:2020
Applied Clauses :
Clause 14.1.5, 14.1.6
Applied Figures :
Fig13, fig14
Applied Table :
Table 5
Operation Method :
Manual Operation
Test Plugs :
Customized
Description

IEC62196 Electric Vehicle Withdrawal Force And Latching Verification Test Apparatus

Complied Standards & Clauses


IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14.

IEC 62196-1:2014 clause 17.2.

Equipment Overview


This test equipment conforms to IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector and the minimum force required when the single-stage pin is pulled out of the socket. It is also used to verify the design of contact tubes can ensure adequate contact continuity before and after a number of operations corresponding to their operational life.

Technical Parameters


A Maximum withdrawal force

The maximum withdrawal force of the socket-outlet shall meet the requirements of Table 1.

Apply the maximum withdrawal force specified in the standard (total force of the principal weight, supplementary weight, hook (clamping device) to the test plug, when the supplementary weight is dropped from a height of 50mm, the plug should come out of the socket.

User should select an appropriate weight for the test according to the following table:

Sample type

(AC A)

Withdrawal

N

Principal weight

N

Supplementary weight

N

6-40 165 148.5 16.5
41-80 300 270 30
81-150 440 396 44
151-250 660 396+148.5+49.5 66

Sample type

(DC A)

Any 750 396+148.5+49.5+15 75
Clause 17.2 A
<59 150 135 15
60-99 275 247.5 27.5
100-125 400 270+90 40
Note: The principal weight already contains the test plug and hook weight

B Minimum withdrawal force

Insert the gauge with the minimum withdrawal force specified in the standard (that is, the test pin (single pin) that meets the requirements of this standard, the total mass of the pin should be equal to the value specified in the table) into each individual socket in the socket-outlet. The gauge must not be removed from the socket within 30 seconds.

Nominal pin diameter

mm

Diameter of gauge

mm +0 -0.01

Minimum total force

N

5 4.80 2.5
6 5.80 5
7 6.80 5
8 7.80 10
10 9.80 15
12 11.80 20
Note: The minimum withdrawal force already includes the weight of the gauge

C Structure features

This device is mainly composed of the installation fixture, the clamping device, principal weight, supplementary weight and the test plug. Based on experience, the pull clamp is changed to a counterweight, the weight hook is directly connected to the test plug, and the fixture for holding the sample is configured. The specific shape is shown in figure 1.

Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196

D Test plug

The test plug, according to the relevant standard sheets, shall have finely ground contacts of hardened steel, having a surface roughness not exceeding 0,8 µm over their active length and spaced at the nominal distances, with a tolerance of ±0,05 mm.

The dimension of the plug contacts or the distance between contact surfaces for other types of plug contacts shall be in accordance with the minimum dimension(s) given in the relevant standard sheets, with a tolerance of +0,010mm

The test plugs are not included in this test apparatus, please use those test plugs that client already ordered separately as following:

No.: Standard Figure No.: Name QTY
1 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-I sheet 1 Test-plug1:32A,250 V AC VEHICLE INLET 1
2 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-Ilb sheet 1 Test-plug1:63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE 1
3 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-Ild sheet 1 Test-VEHICLE INLET2: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE 1
4 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-Ilf sheet 1 Test-VEHICLE INLET3: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE 1
5 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-Illa sheet 1 Test-Plug 4: 16 A, 250 V SINGLE-PHASE PLUG WITH 1 PILOT CONTACT 1
6 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-Illb sheet 1 Test-Plug 6: 32 A, 250 V SINGLE-PHASE PLUG WITH 2 PILOT CONTACTS 1
7 IEC62196-2/Ed.3/CDV © IEC(E) STANDARD SHEET 2-Illc sheet 1 Test-Plug 8: 63 A, 480 V THREE-PHASE PLUG WITH 2 PILOT CONTACTS 1
8 IEC62196-3/Ed.2/CDV © IEC(E) STANDARD SHEET 3-Ib
Sheet 1
Test VEHICLE CONNECTOR 10 1
9 IEC62196-3/Ed.2/CDV © IEC(E) STANDARD SHEETS
CONFIGURATION BB
VEHICLE COUPLER 250 A 900 V DC
STANDARD SHEET 3-Iia Sheet 1
Test VEHICLE CONNECTOR 11 1
10 IEC62196-3/Ed.2/CDV © IEC(E) STANDARD SHEET 3-IIIa Sheet 2 Test VEHICLE INLET 12 1
11 IEC62196-3/Ed.2/CDV © IEC(E) STANDARD SHEET 3-Iva VEHICLE INLETMODES 2, 3 AND 4 Sheet 2 Test VEHICLE INLET 13 1
12 IEC62196-3/Ed.2/CDV © IEC(E) STANDARD SHEET 3-Ivb VEHICLE INLET ALL MODES Sheet 1 Test VEHICLE INLET 14 1

E Test pins

The test pins are not included in this test apparatus, please use those test pins that client already ordered separately as following:

Nominal pin diameter

mm

Diameter of gauge

mm +0 -0.01

Minimum total force

N

5 4.80 2.5
6 5.80 5
7 6.80 5
8 7.80 10
10 9.80 15
12 11.80 20
Note: The minimum withdrawal force already includes the weight of the gauge
Send your message to this supplier
Send Now

Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196

Ask Latest Price
Brand Name :
Sinuo
Model Number :
SN1013
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Contact Supplier
Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196
Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196
Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196
Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196

Sinuo Testing Equipment Co. , Limited

Verified Supplier
4 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Employee Number :
<100
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement