MachineU > China Products > Machinery > Cleaning Equipment > Filtration Equipment > Dust Collector
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
Specifications
Brand Name :
Sinuo
Model Number :
SN441C-19.8F
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Supply Ability :
10 Sets Per Month
Delivery Time :
30 Days
Packaging Details :
Export packing
Product vacuum degree :
≤60KPa
Dust concentration :
2～4kg/m3
Air flow meter :
Mechanical type
Airflow speed :
Not more than 2m/s
Inner chamber dimensions :
3000*2000*3300mm (W*D*H)
Outer chamber dimensions :
3200*2700*4500 mm(W*D*H)
Description

IEC 60068-2-68 Floor Stand Large Sand and Dust Test Chamber


Complied Standards & Clauses


IEC 60068-2-68: 2001 Environmental testing- Part 2: Tests- Test L Dust and sand.

Product Overview

This equipment is suitable for testing electrical and electronic products, automobile and motorcycle parts, and seals in sand and dust environments to prevent sand and dust from entering the seals and shells. To test the performance of electronic and electrical products, automobile and motorcycle parts, and seals in use, storage, and transportation in sandy and dusty environments. The purpose of the test is to determine the possible harmful effects of particles carried by airflow on electrical products. The test can be used to simulate open sand and dust air environmental conditions induced by the natural environment or man-made disturbances such as vehicle movement.

Technical Parameters

1. Volume and dimensions
1.1 Effective volume of inner chamber About 19.8 cubic meters
1.2 Inner chamber dimensions 3000*2000*3300mm (W*D*H)
1.3 Outer chamber dimensions About 3200*27000*4500 mm(W*D*H)
Test sample specifications

Charging stations, electrical cabinets, energy storage cabinets
The size range is not larger than 2000*1500*2500m (W*D*H) Weight 1000kg
2. Function parameters
2.1 Working room temperature RT+10℃～+70℃
2.2 Working humidity ≤75%R.H
2.3 Product vacuum degree ≤60KPa
2.4 Dust composition Talcum powder
2.5 Composition of dust particles Dry talcum powder that can pass through a square hole sieve with a mesh size of 75µm and a wire mesh diameter of 50µm
2.6 Dust concentration 2～4kg/m3
2.7 Air flow meter Mechanical type
2.8 Airflow speed Not more than 2m/s
2.9 Time of control Dust blowing control cycle: 1s ~ 99h (adjustable), test time timing: 1s ~ 99h (adjustable), vibration time: 1S ~ 99H (adjustable)
2.10 Metal mesh Nominal line length: ≥50μm, standard spacing between lines: ≥75μm.
2.11 Sand and dust air circulation device Circulation air ducts and high-power mixed-flow ventilators have an air extraction volume of 80 times the tested shell volume, and the air extraction speed does not exceed 60 times the shell volume per hour. And the speed of the airflow can make the dust evenly distributed in the test chamber. The airflow in the test chamber is mainly top-down vertical airflow rather than laminar flow. The pressure gauge has a calibration interface.
2.12 Load-bearing capacity of cargo platform Not less than 1000kg
2.13 Dust drying system The equipment is equipped with a dust-drying heating device, and there is a heating button on the controller control screen. When the dust is found to be a little moist during the test, you can turn on the heating button on the control screen and start the dust heating device to dry the dust. The button can be turned off after the dust has dried. The drying process will not affect the test process, effectively ensuring the dust concentration in the test chamber and ensuring the accuracy of the test data.
2.14 How to change dust Use a manual vacuum cleaner to replace the dust, and the dust can be easily replaced at any time

Details

IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3

Send your message to this supplier
Send Now

IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SN441C-19.8F
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Contact Supplier
video
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3
IEC 60068-2-68 Floor Stand Large Sand And Dust Test Chamber 19.8m3

Sinuo Testing Equipment Co. , Limited

Verified Supplier
4 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Water Ingress Testing Equipment
MachineU China Products Machinery Cleaning Equipment Filtration Equipment Dust Collector
Contact Supplier
Submit Requirement