MachineU > China Products > Electrical Equipment & Supplies > Electrical Instruments > Battery Testers
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
Specifications
Brand Name :
Sinuo
Model Number :
SN886-18F
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Payment Terms :
T/T
Supply Ability :
1 sets/month
Delivery Time :
45 days
Packaging Details :
Other
Effective volume :
18m³
Cooling method :
Water cooling
Inner box size :
W3000 mm*H2000 mm*D3000mm
Outer box size :
W3800 mm*H2530 mm*D3690 mm
Temperature range :
0°～ +100℃
Humidity range :
20%-98%RH
Heating rate :
2～3℃/min
Cooling rate :
0.7～1℃/min
Description


18m³ Walk-in Constant Temperature and Humidity Test Chamber IEC60068-2-30

Complied Standards & Clauses

Conforms to:

IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

Equipment Overview


The walk-in constant temperature and humidity test room is suitable for safety performance testing of electronic components, providing reliability testing, product screening testing, etc. At the same time, through this test, the reliability of the product is improved and the quality control of the product is carried out. The walk-in constant temperature and humidity laboratory is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. It assesses and determines the parameters and performance of electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products after the temperature environment changes rapidly during high and low temperature and humidity tests, and the adaptability of use. It is suitable for schools, factories, military industry, research and development and other units.


Technical Parameters

1.Product name Walk-in Constant Temperature and Humidity Test Chamber
Mode SN886-18F
2.Applicable instructions
Applicable range The walk-in constant temperature and humidity test room is suitable for safety performance testing of electronic components, providing reliability testing, product screening testing, etc. At the same time, through this test, the reliability of the product is improved and the quality control of the product is carried out. The walk-in constant temperature and humidity laboratory is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. It assesses and determines the parameters and performance of electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products after the temperature environment changes rapidly during high and low temperature and humidity tests, and the adaptability of use. It is suitable for schools, factories, military industry, research and development and other units.
3.Volume and size
3.1. Effective volume 18m³
3.2. Inner box size W3000 mm*H2000 mm*D3000mm
3.3. Outer box size About W3800 mm*H2530 mm*D3690 mm(Excluding unit size)
4.Performance
4.1. Cooling method Water cooling
4.2. Temperature range 0°～ +100℃
4.3. Humidity range 20%-98%RH
4.4. Heating rate 0°～ +100℃ About 2～3℃/min (no load, average)
4.5. Cooling rate +100℃~0℃ About 0.7～1℃/min (no load, average)
4.6. Analysis accuracy 0.01℃
4.7. Temperature fluctuation ±0.5℃
4.8. Temperature deviation ±2.0℃
4.9. Humidity deviation ≤±5.0%RH below 75%RH, ≤+2/-3%RH above 75%RH
4.10. Humidity fluctuation ≤±2.0%R.H
4.11. Temperature and humidity control capability range diagram 18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
4.12. Power supply AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤±10%)
4.14. Test standards

GB-2423.1-2008 (IEC68-2-1) Test A: Low temperature test method.

GB-2423.2-2008 (IEC68-2-2) Test B: High temperature test method.

GB2423.3-2008 (IEC68-2-3) Test Ca: Constant damp heat test method.

GB2423.4-2008 (IEC68-2-30) Test Db: Alternating damp heat test method.

GB 11158 "Technical Conditions of High Temperature Test Chamber"

GB10586-1 "Technical Conditions of Humidity and Heat Test Chamber"
4.15. Power The total power of the equipment is about 25KW
4.16 Noise Measured according to GB/T14623-2008, noise ≤75dB (noise detection device is measured 1m away from the equipment door)
4.17 Energy-saving design The PLC (Programmable Logic Controller) of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions. The refrigeration system can adjust the power according to the load and has compressor energy adjustment technology, which can achieve excellent energy-saving effects.

Details

18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-3018m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30

Send your message to this supplier
Send Now

18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SN886-18F
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Contact Supplier
video
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30
18m³ Walk-in Constant Temperature And Humidity Test Chamber IEC60068-2-30

Sinuo Testing Equipment Co. , Limited

Verified Supplier
4 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Walk In Environmental Test Chamber
MachineU China Products Electrical Equipment & Supplies Electrical Instruments Battery Testers
Contact Supplier
Submit Requirement