IPX5 Waterproof Testing Spray Test System for Charging Station IEC 60529
Complied Standards & Clauses
Conforms to IEC 60529:2013, ISO20653:2006, IEC60068-2-18:2000, etc.
Equipment Overview
Application: used for conducting IPX5 waterproof testing on outdoor ESS systems, the automatic spraying system is applied to the front, rear, left, right, and top surfaces of the outdoor ESS system.
The equipment consists mainly of a water collection pool, water storage tank, water replenishment system, drainage system, spraying system, electrical control system, and pump system.
Technical Parameters
Water spray pressure | 30~150kPa |
Inner diameter of spray hole | φ6.3 mm(IPX5) |
Water spray flow | 12.5±0.625(L/min)(IPX5) |
Pre-set testing time | Adjustable from 1s to 9999h,59 min, and 59s. |
Spray distance | The distance between the outdoor ESS system and the spray nozzle is 2.5 to 3 meters. |
Spray gun material | 304 Stainless steel |
Shipping method | The outdoor ESS system enters the rain test area via a gantry crane (the customer’s site is already equipped). |
Movement speed | The movement speed of the support frame is adjustable. |
Spray coverage requirements | The automatic spraying system needs to cover the front, rear, left, right, and top surfaces.
|
Spray method | The entire test process involves fully automatic spraying, and the movement path of the spraying system does not interfere with the object being tested.
The test process complies with the IPX5 protection level requirements as specified in IEC 60529:2013. |
Testing time | Adjustable from 1s to 9999h,59 min, and 59s. |
Side-moving spraying frame | |
Main parameters of side movable spray rack | The frame is made of 40*40*3mm aluminum |
The sealing plate is made of 1.2mm stainless steel 304# plate | |
IPX5 mobile device: servo motor gear connected to the rack for transmission | |
Swing transmission spray device: adjustable eccentric wheel swing mechanism (swing angle is achieved by adjusting the eccentric distance) | |
Spraying frame stroke: Equipped with a servo motor gear rack mechanism, the movable stroke is 3 m. | |
Swing motor | Servo motor and reducer |
Mobile Motor | Servo motor and reducer |
Gear | Stainless steel gear |
Rack | Stainless steel rack |