MachineU > China Products > Electrical Equipment & Supplies > Electrical Instruments > Battery Testers
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
Specifications
Brand Name :
Sinuo
Model Number :
SN886-6800
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Supply Ability :
10 Sets Per Month
Delivery Time :
30 Days
Packaging Details :
Export packing
Effective volume :
6.8m3
Temperature range :
-50℃~+180℃
Humidity fluctuation :
≤±2.0%R.H
Humidity range :
20%～98%RH
Heating rate :
2℃/min (no load, average)
Cooling rate :
2℃/min (no load, average)
External dimensions Approx. :
2200*2200*3200mm(W*H*D)
Inner box dimensions :
2000*1800*1900mm(W*H*D)
Description

IEC60068-2-30 Walk-in Constant Temperature -and Humidity Test Chamber 6.8m³

Complied Standards & Clauses

Conforms to:

IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

Product Overview

The walk-in constant temperature and humidity test room is suitable for safety performance testing, reliability testing, product screening testing, etc. of electronic components. At the same time, through these tests, the reliability of the product is improved and the quality control of the product is carried out.

The walk-in constant temperature and humidity test room is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. Sample range: electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products. This equipment is used to assess and determine the parameters, performance, and adaptability of the above samples after the high and low temperature and humidity tests with rapid changes in temperature environment.

It is suitable for schools, factories, military industry, research and development and other units.

Technical Parameters

1.1 Model and Purpose
1.1.1 Product model Walk-in Constant Temperature And Humidity Test Chamber SN886-6.8m³
1.1.2 Purpose

The walk-in constant temperature and humidity test room is suitable for safety performance testing, reliability testing, product screening testing, etc. of electronic components. At the same time, through these tests, the reliability of the product is improved and the quality control of the product is carried out.

The walk-in constant temperature and humidity test room is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. Sample range: electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products. This equipment is used to assess and determine the parameters, performance, and adaptability of the above samples after the high and low temperature and humidity tests with rapid changes in temperature environment.

It is suitable for schools, factories, military industry, research and development and other units.

1.2 Volume and Size
1.2.1 Effective volume 6.8m3
1.2.2 Inner box dimensions

W: 2000 mm

H: 1800 mm

D: 1900 mm
1.2.3 External dimensions Approx.

W: 2200 mm

H: 2200 mm

D: 3200 mm

1.3 Performance (ambient temperature -5℃~+28℃, no-load condition)
1.3.1 Temperature range -50℃~+180℃
1.3.2 Heating rate about 2℃/min (no load, average)
1.3.3 Cooling rate about 2℃/min (no load, average)
1.3.4 Resolution accuracy 0.01℃ Data measured under no-load conditions
1.3.5 Temperature fluctuation ±0.5℃
1.3.6 Temperature deviation ±2.0℃
1.3.7 Humidity range 20%～98%RH
1.3.8 Humidity deviation

Below 75%RH: ≤±5.0%RH

Above 75%RH: ≤+2/-3%R.H
1.3.9 Humidity fluctuation ≤±2.0%R.H
1.3.10 Temperature and humidity control capability range diagram IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
1.3.11 Power supply AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤ ±10%)
1.3.12 Power The total power of the equipment is about 25KW
1.3.13 Noise Measured according to GB/T14623-2008, the noise level is ≤75dB (the noise detection device is measured at a distance of 1m from the equipment door).
1.3.14 Standards

IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
1.3.15 Energy-saving design The PLC (Programmable Logic Controller) of the control system is used. The operating conditions of the refrigerator are automatically adjusted according to the test conditions. The refrigeration system can adjust the power according to the load size. It also has compressor energy regulation technology. It can achieve excellent energy-saving effects.
1.3.16 Cooling method

The equipment adopts water cooling (Water tower, water pump)

IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

Details

IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

Send your message to this supplier
Send Now

IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SN886-6800
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Contact Supplier
video
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³
IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

Sinuo Testing Equipment Co. , Limited

Verified Supplier
4 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Walk In Environmental Test Chamber
MachineU China Products Electrical Equipment & Supplies Electrical Instruments Battery Testers
Contact Supplier
Submit Requirement