MachineU > China Products > Electrical Equipment & Supplies > Electrical Instruments > Battery Testers
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
Specifications
Brand Name :
Sinuo
Model Number :
SN554B-15T
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Payment Terms :
T/T
Supply Ability :
1 sets/month
Delivery Time :
45 days
Packaging Details :
Other
Inner box size :
1000×1000×1000mm (W*D*H)
Outer box size :
1300×1400×2000mm (W*D*H)
Pressure range :
1～150kN
Pressure resolution :
0.01KN
Crush acupuncture speed :
0.1-40mm/s
Pressure holding time :
≥100h
Displacement :
0～400mm
Weight :
800kg
Description

AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

Complied Standards & Clauses

Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a)

IEC62133-2012, IS0 12405-4:2018, etc

Equipment Overview

Environmental Requirements:

1. Main power leakage circuit breaker: AC380(1±10%)V (50±0.5)Hz three-phase four-wire + protective ground wire. Install 10㎡ wire, 3P 63A leakage protection switch

2. Power cable: one five-core cable (four-core cable + protective ground wire), about 3 meters long (outside the box)

3. Installation site:

① The ground is flat and well-ventilated;

② No strong vibration around the equipment;

③ No strong electromagnetic field around the equipment;

④ No flammable, explosive, corrosive substances and dust around the equipment;

⑤ Avoid direct sunlight or high temperature and humidity;

⑥ The ground load-bearing capacity of the site: not less than 650kg/m2 (prerequisite: the channel size around the equipment is ≥ 600 mm; the load weight is ≤ 500kg);

⑦ There is appropriate space for use and maintenance around the equipment:

⑧ There should be space around the equipment for at least one person to pass through, i.e. ≥600mm;

⑨ There should be space for the equipment door to open and close normally. And there should be no other objects in front of the equipment door.

4. Environmental conditions: Temperature: 20℃±5℃; Relative humidity: ≤85%RH; Atmospheric pressure: 80kPa～106kPa

Technical Parameters

User battery cell size Maximum size (length x width x height): 225*185*160mm, weight: 18kg-20kg
Test space 1000×1000×1000mm (width, depth and height)
Dimensions 1300×1400×2000mm (width, depth and height, subject to actual design)
Equipment structure Box-type structure
Smoke exhaust port Smoke exhaust port is 150mm in diameter
Test hole A 50mm hole is opened on each side
Control method Remote computer control, distance ≥10m
Drive method Electric cylinder drive
Pressure range 1～150kN
Pressure accuracy ±1%FS
Pressure resolution 0.01KN
Pressure holding time ≥100h can be set
Crush acupuncture speed 0.1-40mm/s (adjustable)
Speed ​​accuracy 0.1mm/s~5mm/s, accuracy ±0.05mm/s; 5mm/s~40mm/s, accuracy ±0.1mm/s
Speed ​​resolution ≤0.01mm/s
Displacement 0～400mm
Displacement accuracy ±0.1mm
Details

AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing EquipmentAIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

Send your message to this supplier
Send Now

AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

Ask Latest Price
Product Detail
Brand Name :
Sinuo
Model Number :
SN554B-15T
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Contact Supplier
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment
AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

Sinuo Testing Equipment Co. , Limited

Verified Supplier
4 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products EV Battery Testing Equipment
MachineU China Products Electrical Equipment & Supplies Electrical Instruments Battery Testers
Contact Supplier
Submit Requirement